Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Jie Luo]

On 11/18/2023 11:36 PM, Andrew Lunn wrote:
> > The clock arguments are provided in the later part as below. i will also
> > provide more detail clock names for the new added clocks for the ipq5332
> > platform in description.
> >
> >    - if:
> >
> >        properties:
> >
> >          compatible:
> >
> >            contains:
> >
> >              enum:
> >
> >                - qcom,ipq5332-mdio
> >
> >      then:
> >
> >        properties:
> >
> >          clocks:
> >
> >            items:
> >
> >              - description: MDIO clock source frequency fixed to 100MHZ
> >
> >              - description: UNIPHY0 AHB clock source frequency fixed to
> > 100MHZ
> >              - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
> >              - description: UNIPHY1 AHB clock source frequency fixed to
> > 100MHZ
> >              - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ
>
> As i said before, the frequency of the clocks does not matter
> here. That appears to be the drivers problem. I assume every board
> design, with any sort of PHY, needs the same clock configuration?
>
>        Andrew

Yes, Andrew, no matter what kind of PHY is connected, these clocks are
fix clocks, the clock rates are same as mentioned above, which are the 
SOC clock configurations.