[PATCH 1/4 net] qca_spi: Fix SPI thread creation

[Stefan Wahren]

The qca_spi driver create/stop the SPI kernel thread in case
of netdev_open/close. This is a big issue because it allows
userspace to prevent from restarting the SPI thread after
ring parameter changes (e.g. signals which stop the thread).
This could be done by terminating a script which changes
the ring parameter in a loop.

So fix this by moving create/stop of the SPI kernel into
the init/uninit ops. The open/close ops could be realized just
by 'park/unpark' the SPI kernel thread.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 35 ++++++++++++++++---------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index bec723028e96..b11a998b2456 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -580,6 +580,11 @@ qcaspi_spi_thread(void *data)
 	netdev_info(qca->net_dev, "SPI thread created\n");
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park()) {
+			kthread_parkme();
+			continue;
+		}
+
 		if ((qca->intr_req == qca->intr_svc) &&
 		    !qca->txr.skb[qca->txr.head])
 			schedule();
@@ -679,25 +684,17 @@ qcaspi_netdev_open(struct net_device *dev)
 	qca->sync = QCASPI_SYNC_UNKNOWN;
 	qcafrm_fsm_init_spi(&qca->frm_handle);

-	qca->spi_thread = kthread_run((void *)qcaspi_spi_thread,
-				      qca, "%s", dev->name);
-
-	if (IS_ERR(qca->spi_thread)) {
-		netdev_err(dev, "%s: unable to start kernel thread.\n",
-			   QCASPI_DRV_NAME);
-		return PTR_ERR(qca->spi_thread);
-	}
-
 	ret = request_irq(qca->spi_dev->irq, qcaspi_intr_handler, 0,
 			  dev->name, qca);
 	if (ret) {
 		netdev_err(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
 			   QCASPI_DRV_NAME, qca->spi_dev->irq, ret);
-		kthread_stop(qca->spi_thread);
 		return ret;
 	}

 	/* SPI thread takes care of TX queue */
+	kthread_unpark(qca->spi_thread);
+	wake_up_process(qca->spi_thread);

 	return 0;
 }
@@ -712,8 +709,7 @@ qcaspi_netdev_close(struct net_device *dev)
 	qcaspi_write_register(qca, SPI_REG_INTR_ENABLE, 0, wr_verify);
 	free_irq(qca->spi_dev->irq, qca);

-	kthread_stop(qca->spi_thread);
-	qca->spi_thread = NULL;
+	kthread_park(qca->spi_thread);
 	qcaspi_flush_tx_ring(qca);

 	return 0;
@@ -807,6 +803,7 @@ static int
 qcaspi_netdev_init(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);
+	struct task_struct *thread;

 	dev->mtu = QCAFRM_MAX_MTU;
 	dev->type = ARPHRD_ETHER;
@@ -830,6 +827,15 @@ qcaspi_netdev_init(struct net_device *dev)
 		return -ENOBUFS;
 	}

+	thread = kthread_create(qcaspi_spi_thread, qca, "%s", dev->name);
+	if (IS_ERR(thread)) {
+		netdev_err(dev, "%s: unable to start kernel thread.\n",
+			   QCASPI_DRV_NAME);
+		return PTR_ERR(thread);
+	}
+
+	qca->spi_thread = thread;
+
 	return 0;
 }

@@ -838,6 +844,11 @@ qcaspi_netdev_uninit(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);

+	if (qca->spi_thread) {
+		kthread_stop(qca->spi_thread);
+		qca->spi_thread = NULL;
+	}
+
 	kfree(qca->rx_buffer);
 	qca->buffer_size = 0;
 	dev_kfree_skb(qca->rx_skb);
--
2.34.1