Re: [PATCH v3 1/3] cpufreq: qcom-nvmem: Enable virtual power domain devices

[Ulf Hansson]

On Tue, 14 Nov 2023 at 11:08, Stephan Gerhold
<stephan.gerhold@xxxxxxxxxxxxxxx> wrote:
>
> The genpd core caches performance state votes from devices that are
> runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve
> runtime PM performance state handling"). They get applied once the
> device becomes active again.
>
> To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
> calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
> devices that use runtime PM only to control the enable and performance
> state for the attached power domain.
>
> However, at the moment nothing ever resumes the virtual devices created
> for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
> means that performance state votes made during cpufreq scaling get
> always cached and never applied to the hardware.
>
> Fix this by enabling the devices after attaching them.
>
> Without this fix performance states votes are silently ignored, and the
> CPU/CPR voltage is never adjusted. This has been broken since 5.14 but
> for some reason no one noticed this on QCS404 so far.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 1cb8339ca225 ("cpufreq: qcom: Add support for qcs404 on nvmem driver")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>

Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

Kind regards
Uffe


> ---
>  drivers/cpufreq/qcom-cpufreq-nvmem.c | 46 +++++++++++++++++++++++++++++++++---
>  1 file changed, 43 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 6355a39418c5..d239a45ed497 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -25,6 +25,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <linux/pm_opp.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/slab.h>
>  #include <linux/soc/qcom/smem.h>
>
> @@ -55,6 +56,7 @@ struct qcom_cpufreq_match_data {
>
>  struct qcom_cpufreq_drv_cpu {
>         int opp_token;
> +       struct device **virt_devs;
>  };
>
>  struct qcom_cpufreq_drv {
> @@ -424,6 +426,18 @@ static const struct qcom_cpufreq_match_data match_data_ipq8074 = {
>         .get_version = qcom_cpufreq_ipq8074_name_version,
>  };
>
> +static void qcom_cpufreq_put_virt_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu)
> +{
> +       const char * const *name = drv->data->genpd_names;
> +       int i;
> +
> +       if (!drv->cpus[cpu].virt_devs)
> +               return;
> +
> +       for (i = 0; *name; i++, name++)
> +               pm_runtime_put(drv->cpus[cpu].virt_devs[i]);
> +}
> +
>  static int qcom_cpufreq_probe(struct platform_device *pdev)
>  {
>         struct qcom_cpufreq_drv *drv;
> @@ -478,6 +492,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>         of_node_put(np);
>
>         for_each_possible_cpu(cpu) {
> +               struct device **virt_devs = NULL;
>                 struct dev_pm_opp_config config = {
>                         .supported_hw = NULL,
>                 };
> @@ -498,7 +513,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>
>                 if (drv->data->genpd_names) {
>                         config.genpd_names = drv->data->genpd_names;
> -                       config.virt_devs = NULL;
> +                       config.virt_devs = &virt_devs;
>                 }
>
>                 if (config.supported_hw || config.genpd_names) {
> @@ -509,6 +524,27 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>                                 goto free_opp;
>                         }
>                 }
> +
> +               if (virt_devs) {
> +                       const char * const *name = config.genpd_names;
> +                       int i, j;
> +
> +                       for (i = 0; *name; i++, name++) {
> +                               ret = pm_runtime_resume_and_get(virt_devs[i]);
> +                               if (ret) {
> +                                       dev_err(cpu_dev, "failed to resume %s: %d\n",
> +                                               *name, ret);
> +
> +                                       /* Rollback previous PM runtime calls */
> +                                       name = config.genpd_names;
> +                                       for (j = 0; *name && j < i; j++, name++)
> +                                               pm_runtime_put(virt_devs[j]);
> +
> +                                       goto free_opp;
> +                               }
> +                       }
> +                       drv->cpus[cpu].virt_devs = virt_devs;
> +               }
>         }
>
>         cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
> @@ -522,8 +558,10 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>         dev_err(cpu_dev, "Failed to register platform device\n");
>
>  free_opp:
> -       for_each_possible_cpu(cpu)
> +       for_each_possible_cpu(cpu) {
> +               qcom_cpufreq_put_virt_devs(drv, cpu);
>                 dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
> +       }
>         return ret;
>  }
>
> @@ -534,8 +572,10 @@ static void qcom_cpufreq_remove(struct platform_device *pdev)
>
>         platform_device_unregister(cpufreq_dt_pdev);
>
> -       for_each_possible_cpu(cpu)
> +       for_each_possible_cpu(cpu) {
> +               qcom_cpufreq_put_virt_devs(drv, cpu);
>                 dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
> +       }
>  }
>
>  static struct platform_driver qcom_cpufreq_driver = {
>
> --
> 2.39.2
>