[REGRESSION] Boot hangs when SLUB_DEBUG_ON=y and KASAN_GENERIC=y

[Hyeonggon Yoo]

On Wed, Nov 22, 2023 at 12:17 PM Hyeonggon Yoo <42.hyeyoo@xxxxxxxxx> wrote:
>
> On Tue, Nov 21, 2023 at 1:08 PM <andrey.konovalov@xxxxxxxxx> wrote:
> >
> > From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
> >
> > Evict alloc/free stack traces from the stack depot for Generic KASAN
> > once they are evicted from the quaratine.
> >
> > For auxiliary stack traces, evict the oldest stack trace once a new one
> > is saved (KASAN only keeps references to the last two).
> >
> > Also evict all saved stack traces on krealloc.
> >
> > To avoid double-evicting and mis-evicting stack traces (in case KASAN's
> > metadata was corrupted), reset KASAN's per-object metadata that stores
> > stack depot handles when the object is initialized and when it's evicted
> > from the quarantine.
> >
> > Note that stack_depot_put is no-op if the handle is 0.
> >
> > Reviewed-by: Marco Elver <elver@xxxxxxxxxx>
> > Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
>
> I observed boot hangs on a few SLUB configurations.
>
> Having other users of stackdepot might be the cause. After passing
> 'slub_debug=-' which disables SLUB debugging, it boots fine.

Looks like I forgot to Cc regzbot.
If you need more information, please let me know.

#regzbot introduced: f0ff84b7c3a

Thanks,
Hyeonggon

> compiler version: gcc-11
> config: https://download.kerneltesting.org/builds/2023-11-21-f121f2/.config
> bisect log: https://download.kerneltesting.org/builds/2023-11-21-f121f2/bisect.log.txt
>
> [dmesg]
> (gdb) lx-dmesg
> [    0.000000] Linux version 6.7.0-rc1-00136-g0e8b630f3053
> (hyeyoo@localhost.localdomain) (gcc (GCC) 11.3.1 20221121 (R3[
> 0.000000] Command line: console=ttyS0 root=/dev/sda1 nokaslr
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
> 6.7.0-rc1-00136-g0e8b630f3053 #22
> [    0.000000] RIP: 0010:setup_arch+0x500/0x2250
> [    0.000000] Code: c6 09 08 00 48 89 c5 48 85 c0 0f 84 58 13 00 00
> 48 c1 e8 03 48 83 05 be 97 66 00 01 80 3c 18 00 0f3[    0.000000] RSP:
> 0000:ffffffff86007e00 EFLAGS: 00010046 ORIG_RAX: 0000000000000009
> [    0.000000] RAX: 1fffffffffe40088 RBX: dffffc0000000000 RCX: 1ffffffff11ed630
> [    0.000000] RDX: 0000000000000000 RSI: feec4698e8103000 RDI: ffffffff88f6b180
> [    0.000000] RBP: ffffffffff200444 R08: 8000000000000163 R09: 1ffffffff11ed628
> [    0.000000] R10: ffffffff88f7a150 R11: 0000000000000000 R12: 0000000000000010
> [    0.000000] R13: ffffffffff200450 R14: feec4698e8102444 R15: feec4698e8102444
> [    0.000000] FS:  0000000000000000(0000) GS:ffffffff88d5b000(0000)
> knlGS:0000000000000000
> [    0.000000] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [    0.000000] CR2: ffffffffff200444 CR3: 0000000008f0e000 CR4: 00000000000000b0
> [    0.000000] Call Trace:
> [    0.000000]  <TASK>
> [    0.000000]  ? show_regs+0x87/0xa0
> [    0.000000]  ? early_fixup_exception+0x130/0x310
> [    0.000000]  ? do_early_exception+0x23/0x90
> [    0.000000]  ? early_idt_handler_common+0x2f/0x40
> [    0.000000]  ? setup_arch+0x500/0x2250
> [    0.000000]  ? __pfx_setup_arch+0x10/0x10
> [    0.000000]  ? vprintk_default+0x20/0x30
> [    0.000000]  ? vprintk+0x4c/0x80
> [    0.000000]  ? _printk+0xba/0xf0
> [    0.000000]  ? __pfx__printk+0x10/0x10
> [    0.000000]  ? init_cgroup_root+0x10f/0x2f0
> --Type <RET> for more, q to quit, c to continue without paging--
> [    0.000000]  ? cgroup_init_early+0x1e4/0x440
> [    0.000000]  ? start_kernel+0xae/0x790
> [    0.000000]  ? x86_64_start_reservations+0x28/0x50
> [    0.000000]  ? x86_64_start_kernel+0x10e/0x130
> [    0.000000]  ? secondary_startup_64_no_verify+0x178/0x17b
> [    0.000000]  </TASK>