[PATCH v2 04/10] wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit set

[Ilpo Järvinen]

BIT(7) (PME_Status) is first checked and then set unnecessarily. Remove
the unnecessary setting for the bit that is already on and adjust the
comment related to it.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 1633328bc3d1..6ae37d61a2a2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2312,9 +2312,7 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
 		pci_read_config_byte(rtlpci->pdev, cap_pointer + 5, &pmcs_reg);
 
 		if (pmcs_reg & BIT(7)) {
-			/* PME event occured, clear the PM_Status by write 1 */
-			pmcs_reg = pmcs_reg | BIT(7);
-
+			/* Clear PME_Status with write */
 			pci_write_config_byte(rtlpci->pdev, cap_pointer + 5,
 					      pmcs_reg);
 			/* Read it back to check */
-- 
2.30.2