Re: [PATCH v2 2/3] arm64: dts: qcom: sc7280: Move video-firmware to chrome-common

[Vikash Garodia]

On 11/24/2023 5:05 PM, Luca Weiss wrote:
> On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote:
>>
>> On 11/22/2023 7:50 PM, Luca Weiss wrote:
>>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote:
>>>>
>>>> On 10/2/2023 7:50 PM, Luca Weiss wrote:
>>>>> If the video-firmware node is present, the venus driver assumes we're on
>>>>> a system that doesn't use TZ for starting venus, like on ChromeOS
>>>>> devices.
>>>>>
>>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus
>>>>> on a non-ChromeOS devices.
>>>>>
>>>>> At the same time also disable the venus node by default in the dtsi,
>>>>> like it's done on other SoCs.
>>>>>
>>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
>>>>> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
>>>>> ---
>>>>>  arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++
>>>>>  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 6 ++----
>>>>>  2 files changed, 10 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>> index 5d462ae14ba1..cd491e46666d 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>>>> @@ -104,6 +104,14 @@ &scm {
>>>>>  	dma-coherent;
>>>>>  };
>>>>>  
>>>>> +&venus {
>>>>> +	status = "okay";
>>>>> +
>>>>> +	video-firmware {
>>>>> +		iommus = <&apps_smmu 0x21a2 0x0>;
>>>>> +	};
>>>>> +};
>>>>> +
>>>>>  &watchdog {
>>>>>  	status = "okay";
>>>>>  };
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>> index 66f1eb83cca7..fa53f54d4675 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 {
>>>>>  				 <&apps_smmu 0x2184 0x20>;
>> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the
>> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am
>> seeing below crash
>>
>> Call trace:
>> [   47.663593]  qcom_smmu_write_s2cr+0x64/0xa4
>> [   47.663616]  arm_smmu_attach_dev+0x120/0x284
>> [   47.663647]  __iommu_attach_device+0x24/0xf8
>> [   47.676845]  __iommu_device_set_domain+0x70/0xd0
>> [   47.681632]  __iommu_group_set_domain_internal+0x60/0x1b4
>> [   47.687218]  iommu_setup_default_domain+0x358/0x418
>> [   47.692258]  __iommu_probe_device+0x3e4/0x404
>>
>> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the
>> qcm6490-fairphone-fp5 hardware having TZ ?
> 
> Hi,
> 
> On FP5 it seems it's no problem to have both SIDs in there, probe and
> using venus appears to work fine.
> 
> Are you using different firmware than QCM6490.LA.3.0 on the device where
> you tested this?
I was testing this on RB3 board which uses firmware [1].

Regards,
Vikash

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0

>>
>>>>>  			memory-region = <&video_mem>;
>>>>>  
>>>>> +			status = "disabled";
>>>>> +
>>>>>  			video-decoder {
>>>>>  				compatible = "venus-decoder";
>>>>>  			};
>>>>> @@ -3748,10 +3750,6 @@ video-encoder {
>>>>>  				compatible = "venus-encoder";
>>>>>  			};
>>>>>  
>>>>> -			video-firmware {
>>>>> -				iommus = <&apps_smmu 0x21a2 0x0>;
>>>>> -			};
>>>>> -
>>>>>  			venus_opp_table: opp-table {
>>>>>  				compatible = "operating-points-v2";
>>>>>  
>>>>>
>>>> Changes look good. Is this tested on SC7280 ?
>>>
>>> Hi Vikash,
>>>
>>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff
>>> reports no differences except for status = okay property being added, so
>>> there should be no change on those boards. See below.
>>>
>>> Regards
>>> Luca
>>
>> I tested on SC7280 (herobrine) and all good.
> 
> Great, thanks!
> 
> Regards
> Luca
> 
>>
>> Regards,
>> Vikash
>