[PATCH 0/6] mfd: twl: system-power-controller

[Andreas Kemnade]

Add system-power-controller property in the bindings and
the corresponding implementation and use it where
appropriate.
Not all cases are hit yet, there has probably to be a
separate series after going through with a brush.

Andreas Kemnade (6):
  dt-bindings: mfd: ti,twl: Document system-power-controller
  twl-core: add power off implementation for twl603x
  ARM: dts: omap-embt2ws: system-power-controller for bt200
  ARM: dts: omap4-panda-common: Enable powering off the device
  mfd: twl4030-power: accept standard property for power controller
  ARM: dts: omap: gta04: standardize system-power-controller

 .../devicetree/bindings/mfd/ti,twl.yaml       |  2 ++
 arch/arm/boot/dts/ti/omap/omap3-gta04.dtsi    |  2 +-
 .../boot/dts/ti/omap/omap4-epson-embt2ws.dts  |  1 +
 .../boot/dts/ti/omap/omap4-panda-common.dtsi  |  1 +
 drivers/mfd/twl-core.c                        | 34 +++++++++++++++++++
 drivers/mfd/twl4030-power.c                   |  3 ++
 include/linux/mfd/twl.h                       |  1 +
 7 files changed, 43 insertions(+), 1 deletion(-)

-- 
2.39.2