Re: [PATCH v2 1/7] iio: adc: ad7091r-base: Set alert config and drvdata

[Jonathan Cameron]

On Thu, 23 Nov 2023 13:40:16 -0300
Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx> wrote:

Hi Marcelo,

Thanks for the patch. Content looks fine but it wants breaking up into
2 fixes and one reformat.

> Write 1 to bit 4 in the configuration register to set ALERT/BUSY/GPO pin
> to be used as ALERT.

That's s one fix.

> Set device driver data so it can be retrieved when handling alert
> events, avoiding null pointer dereference.

That's one fix - so this should be at least 2 patches.

> 
> Fixes: <ca69300173b6> (iio: adc: Add support for AD7091R5 ADC)
That's not the syntax for a fixes tag.

> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> ---
>  drivers/iio/adc/ad7091r-base.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
> index 8e252cde735b..3ecac3164446 100644
> --- a/drivers/iio/adc/ad7091r-base.c
> +++ b/drivers/iio/adc/ad7091r-base.c
> @@ -28,6 +28,7 @@
>  #define AD7091R_REG_RESULT_CONV_RESULT(x)   ((x) & 0xfff)
>  
>  /* AD7091R_REG_CONF */
> +#define AD7091R_REG_CONF_ALERT_EN   BIT(4)
>  #define AD7091R_REG_CONF_AUTO   BIT(8)
>  #define AD7091R_REG_CONF_CMD    BIT(10)
>  
> @@ -232,9 +233,16 @@ int ad7091r_probe(struct device *dev, const char *name,
>  	iio_dev->channels = chip_info->channels;
>  
>  	if (irq) {
> +		ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
> +					 AD7091R_REG_CONF_ALERT_EN, BIT(4));
> +		if (ret)
> +			return ret;
> +
> +		dev_set_drvdata(st->dev, iio_dev);
>  		ret = devm_request_threaded_irq(dev, irq, NULL,
> -				ad7091r_event_handler,
> -				IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st);
> +						ad7091r_event_handler,
> +						IRQF_TRIGGER_FALLING |
> +						IRQF_ONESHOT, name, st);

This is alignment cleanup. Should not be in a fix.

>  		if (ret)
>  			return ret;
>  	}