Re: [PATCH v7][2/4] mmc: Add Synopsys DesignWare mmc cmdq host driver

[Christian Loehle]

On 21/11/2023 09:10, Jyan Chou wrote:
> We implemented cmdq feature on Synopsys DesignWare mmc driver.
> The difference between dw_mmc.c and dw_mmc_cqe.c were distinct
> register definitions, mmc user flow and the addition of cmdq.
> 
> New version of User Guide had modify mmc driver's usage flow,
> we may need to renew code to precisely follow user guide.
> 
> More over, We added a wait status function to satisfy synopsys
> user guide's description, since this flow might be specific in
> synopsys host driver only.
> 
> Signed-off-by: Jyan Chou <jyanchou@xxxxxxxxxxx>
> 
> —--
> v6 -> v7:
> - Remove reset-names in driver and adjust reset control's code.
> 
> v5 -> v6:
> - Fix linux coding style issues.
> - Drop useless code that is not described in the bindings.
> - Replace devm_clk_get and clk_prepare_enable with devm_clk_get_enabled.
> - Replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL.
> 
> v4 -> v5:
> - Fix linux coding style issues.
> - Fix test robot build errors to make good use of setup_tran_desc
>   call back function.
> - Remove useless function.
> 
> v3 -> v4:
> - Modify dma mode selection and dma addressing bit to statisfy
>   linux coding style.
> 
> v1 -> v2:
> - Remove dw_mci_cqe_set_tran_desc due to the duplicated function.
> - Add ->pre_enable() / ->post_disable()
> 
> v0 -> v1:
> - Seperate different support into single patch.
> - Fix the compiler complains.
> ---
> ---
>  drivers/mmc/host/Kconfig      |   13 +
>  drivers/mmc/host/Makefile     |    1 +
>  drivers/mmc/host/dw_mmc_cqe.c | 1467 +++++++++++++++++++++++++++++++++
>  drivers/mmc/host/dw_mmc_cqe.h |  456 ++++++++++
>  4 files changed, 1937 insertions(+)
>  create mode 100644 drivers/mmc/host/dw_mmc_cqe.c
>  create mode 100644 drivers/mmc/host/dw_mmc_cqe.h
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 58bd5fe4cd25..06bb4de28cc4 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -837,6 +837,19 @@ config MMC_DW_STARFIVE
>  	  Synopsys DesignWare Memory Card Interface driver. Select this option
>  	  for platforms based on StarFive JH7110 SoC.
>  
> +config MMC_DW_CQE
> +	tristate "Synopsys DesignWare Memory Card with CQE Interface"
> +	depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
> +	select MMC_CQHCI
> +	help
> +	 This selects support for the Synopsys DesignWare Mobile Storage IP
> +	 block after JEDEC Standard version 5.1. Select this option for SD and
> +	 MMC interfaces that use command queue.
/after/according to/ ?
Does the hardware actually implement both: SD and MMC CQ?
If so that would be very interesting, but also not currently supported by mmc layer.