[PATCH 5/5] ARM: dts: add support for Gossen Metrawatt Profitest

From: Roland Hieber
Date: Mon Nov 27 2023 - 16:11:59 EST

From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>

This is the initial support for the Gossen Metrawatt Profitest MF
(e143_01) board based on a Variscite VAR-SOM-MX7 SoM.

Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Co-developed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Co-developed-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
Co-developed-by: Roland Hieber <rhi@xxxxxxxxxxxxxx>
Signed-off-by: Roland Hieber <rhi@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +
arch/arm/boot/dts/nxp/imx/Makefile | 1 +
arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts | 559 +++++++++++++++++++++++
3 files changed, 567 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 32b195852a75..b751d289c712 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -900,6 +900,13 @@ properties:
- const: toradex,colibri-imx7d-emmc
- const: fsl,imx7d

+ - description: Variscite VAR-SOM-MX7 based boards
+ items:
+ - enum:
+ - gome,e143_01 # Gossen Metrawatt Profitest MF (e143_01)
+ - const: variscite,var-som-mx7
+ - const: fsl,imx7d
+
- description: i.MX7ULP based Boards
items:
- enum:
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index a724d1a7a9a0..f0a68c715a61 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-colibri-iris-v2.dtb \
imx7d-flex-concentrator.dtb \
imx7d-flex-concentrator-mfg.dtb \
+ imx7d-gome-e143_01.dtb \
imx7d-mba7.dtb \
imx7d-meerkat96.dtb \
imx7d-nitrogen7.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts
new file mode 100644
index 000000000000..6e98d34b2e54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Gossen Metrawatt GmbH
+ * Copyright (C) 2022 Marco Felsch, Pengutronix
+ * Copyright (C) 2022 Philipp Zabel, Pengutronix
+ * Copyright (C) 2022 Roland Hieber, Pengutronix
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "imx7d-var-som-mx7.dtsi"
+
+/ {
+ model = "Gossen Metrawatt Profitest MF (e143_01)";
+ compatible = "gome,e143_01", "variscite,var-som-mx7", "fsl,imx7d";
+
+ aliases {
+ gpio7 = &gpio8;
+ rtc0 = &rtc0;
+ };
+
+ max98357a: audio-codec {
+ compatible = "maxim,max98357a";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmode>;
+ sdmode-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; // Pin 60 AUDIO_SHDN_B
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>, <&pinctrl_gpio_keys_2>;
+ autorepeat;
+
+ button-0 {
+ label = "S0";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; // Pin 183 BTN_S0_ESC
+ linux,code = <KEY_ESC>;
+ wakeup-source;
+ };
+
+ button-1 {
+ label = "S1";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; // Pin 185 BTN_S1_MEM
+ linux,code = <KEY_DOCUMENTS>;
+ wakeup-source;
+ };
+
+ button-2 {
+ label = "S2";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; // Pin 181 BTN_S2_HLP
+ linux,code = <KEY_HELP>;
+ wakeup-source;
+ };
+
+ button-3 {
+ label = "S3";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; // Pin 1 BTN_S3_STA
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+
+ button-4 {
+ label = "S4";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; // Pin 168 BTN_S4_IDN
+ linux,code = <KEY_PROG2>;
+ wakeup-source;
+ };
+
+ button-5 {
+ label = "S5";
+ gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; // Pin 28 BTN_S5
+ linux,code = <KEY_F5>;
+ };
+
+ button-6 {
+ label = "S6";
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; // Pin 40 BTN_S6
+ linux,code = <KEY_F6>;
+ };
+
+ button-7 {
+ label = "S7";
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; // Pin 38 BTN_S7
+ linux,code = <KEY_F7>;
+ };
+
+ button-8 {
+ label = "S8";
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; // Pin 36 BTN_S8
+ linux,code = <KEY_F8>;
+ };
+
+ button-9 {
+ label = "S9";
+ gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; // Pin 20 BTN_S9
+ linux,code = <KEY_F9>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_poweroff>;
+ gpios = <&gpio7 14 GPIO_ACTIVE_LOW>; // Pin 7 POWER_OFF_B
+ input;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc2 0>, // ARS_VAL
+ <&adc2 1>, // VBAT_VAL
+ <&adc2 2>, // LCD_BACKLIGHT_VAL
+ <&adc2 3>; // VCC_5V0_FB
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_debug_led>;
+
+ test-led-1 {
+ label = "test-led-1:red";
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; // Pin 44 LED_TEST1_B
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ test-led-2 {
+ label = "test-led-2:red";
+ gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; // Pin 46 LED_TEST2_B
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ leds2 {
+ compatible = "gpio-leds";
+
+ led_netz_gn {
+ label = "mains:green";
+ gpios = <&gpio8 9 GPIO_ACTIVE_LOW>; // LED_NETZ_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_netz_rt {
+ label = "mains:red";
+ gpios = <&gpio8 8 GPIO_ACTIVE_LOW>; // LED_NETZ_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+
+ led_debug_gn {
+ label = "debug:green";
+ gpios = <&gpio8 0 GPIO_ACTIVE_LOW>; // LED_DEBUG_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_debug_rt {
+ label = "debug:red";
+ gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; // LED_DEBUG_RT
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_ul_gn {
+ label = "ulrl:green";
+ gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; // LED_UL_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_ul_rt {
+ label = "ulrl:red";
+ gpios = <&gpio8 6 GPIO_ACTIVE_LOW>; // LED_UL_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+
+ led_rcd_gn {
+ label = "rcd:green";
+ gpios = <&gpio8 3 GPIO_ACTIVE_LOW>; // LED_RCD_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_rcd_rt {
+ label = "rcd:red";
+ gpios = <&gpio8 7 GPIO_ACTIVE_LOW>; // LED_RCD_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+ };
+
+ reg_vled_backlight: regulator-vled-backlight {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_backlight>;
+ regulator-name = "VLED_BACKLIGHT";
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <20000000>;
+ regulator-max-microvolt = <20000000>;
+ enable-active-high;
+ };
+
+ reg_vcc_3v3_per: regulator-vcc-3v3-per {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vcc_3v3_per>;
+ regulator-name = "VCC_3V3_PER";
+ gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; // Pin 83 VCC_3V3_PER_EN
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <30000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_vcc_5v0_per: regulator-vcc-5v0-per {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vcc_5v0_per>;
+ regulator-name = "VCC_5V0_PER";
+ gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; // Pin 75 VCC_5V0_PER_EN
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_imt: regulator-imt {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_imt>;
+ regulator-name = "VCC_IMT";
+ gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; // Pin 66 MT_EN
+ regulator-min-microvolt = <9000000>;
+ regulator-max-microvolt = <9000000>;
+ enable-active-high;
+ };
+
+ reg_vcc_1v8_alg: regulator-vcc-1v8-alg {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8_ALG";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&reg_vcc_3v3_per>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "max98357aaudio";
+ /delete-property/ simple-audio-card,widgets;
+ /delete-property/ simple-audio-card,routing;
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&max98357a>;
+ };
+ };
+
+ uc-imt-power {
+ compatible = "reg-userspace-consumer";
+ regulator-name = "reg_imt-consumer";
+ regulator-supplies = "vcc";
+ vcc-supply = <&reg_imt>;
+ };
+};
+
+&adc2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ /delete-node/ wm8731@1a;
+
+ /* DS1339 RTC module */
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ trickle-resistor-ohms = <250>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 GPIO_ACTIVE_LOW>; // Pin 120 RTC_INT_B
+ wakeup-source;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio4 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 175 I2C4_SCL
+ sda-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 173 I2C4_SDA
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio8: max7312@23 {
+ compatible = "maxim,max7312";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED_DEBUG_GN", "LED_DEBUG_RT", "LED_UL_GN", "LED_RCD_GN",
+ "", "", "LED_UL_RT", "LED_RCD_RT",
+ "LED_NETZ_RT", "LED_NETZ_GN", "", "",
+ "DP_HW_CODE_1", "DP_HW_CODE_2", "DP_HW_CODE_3", "DP_HW_CODE_4";
+ vcc-supply = <&reg_vcc_3v3_per>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "GWDOG_RST_B", "BTN_S3_STA", "BTN_S4_IDN", "",
+ "", "", "", "USB_HOST_PWR_EN",
+ "", "", "BTN_S2_HLP", "BTN_S1_MEM",
+ "BTN_S0_ESC", "RTC_INT_B", "SOM: bt reg on";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "",
+ "DBG_GPIO1", "DBG_GPIO2", "DBG_GPIO3", "DBG_GPIO4",
+ "", "", "", "",
+ "MT_RXD", "MT_TXD", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "VCC_3V3_PER_EN", "",
+ "DSI_RESET", "VCC_5V0_PER_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "LED_TEST1_B", "LED_TEST2_B",
+ "BTN_S8", "BTN_S6", "MT_RESET", "",
+ "", "", "MT_EN", "",
+ "", "", "", "",
+ "", "", "", "",
+ "AUDIO_SHDN_B", "", "BTN_S7", "",
+ "BTN_S5", "", "", "BTN_S9",
+ "BATT_LOW";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "I2C1_SCL", "I2C1_SDA", "I2C2_SCL", "I2C2_SDA",
+ "", "", "I2C4_SCL", "I2C4_SDA",
+ "", "", "", "",
+ "", "", "", "HIL_SPI_CS0";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "SOM: ethphy0 reset";
+};
+
+&gpio6 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "SOM: sd3_pwr (eMMC)";
+};
+
+&gpio7 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "LCD_BACKLIGHT_EN", "", "POWER_OFF_B";
+};
+
+&lcdif {
+ assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>,
+ <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+ assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+ assigned-clock-rates = <0>, <128000000>;
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,burst-clock-frequency = <850000000>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "tianma,tm050jdhg33", "ilitek,ili9881c";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_panel>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; // Pin 73 DSI_RESET
+ power-supply = <&reg_vcc_3v3_per>;
+ dsi-lanes = <2>;
+
+ rotation = <90>;
+
+ ilitek,enable-internal-backlight;
+ default-brightness = <2047>;
+ ilitek,pwm-frequency = <50000>;
+ ilitek,backlight-supply = <&reg_vled_backlight>;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+ <&clks IMX7D_SAI3_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&iomuxc_lpsr {
+ pinctrl_gpio_keys_2: pinctrl_gpio_keys_2grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0C
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0C
+ >;
+ };
+
+ pinctrl_usbotg2_pwr: pinctrl_usbotg2_pwrgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
+ >;
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: pinctrl-gpio-keysgrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x0000000C
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0000000C
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0000000C
+ MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x0000000C
+ MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x0000000C
+ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0000000C
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0000000C
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x0000000C
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x4000007f
+ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x4000007f
+ >;
+ };
+
+ pinctrl_mipi_backlight: mipi-backlightgrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x0000001B
+ >;
+ };
+
+ pinctrl_mipi_panel: mipi-panelgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x0000001B /* DSI_RESET */
+ >;
+ };
+
+ pinctrl_poweroff: pinctrl_poweroffgrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_vcc_3v3_per: pinctrl_reg_vcc_3v3_pergrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_vcc_5v0_per: pinctrl_reg_vcc_5v0_pergrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_imt: pinctrl_reg_imtgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x0000001B
+ >;
+ };
+
+ pinctrl_rtc: pinctrl_rtcgrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0000001B
+ >;
+ };
+
+ pinctrl_sai3: pinctrl_sai3grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x0000001F
+ MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x0000001F
+ MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x00000030
+ >;
+ };
+
+ pinctrl_sdmode: pinctrl_sdmodegrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0000001F
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 /* DEBUG_UART1_TXD */
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 /* DEBUG_UART1_RXD */
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x79
+ >;
+ };
+
+ pinctrl_debug_led: pinctrl_debug_ledgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00000003
+ MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00000003
+ >;
+ };
+};

--
2.39.2