Re: [PATCH v10 14/14] dmaengine: idxd: Add support for device/wq defaults
From: Dave Jiang
Date: Mon Nov 27 2023 - 17:19:34 EST
On 11/27/23 13:27, Tom Zanussi wrote:
> Add a load_device_defaults() function pointer to struct
> idxd_driver_data, which if defined, will be called when an idxd device
> is probed and will allow the idxd device to be configured with default
> values.
>
> The load_device_defaults() function is passed an idxd device to work
> with to set specific device attributes.
>
> Also add a load_device_defaults() implementation IAA devices; future
> patches would add default functions for other device types such as
> DSA.
>
> The way idxd device probing works, if the device configuration is
> valid at that point e.g. at least one workqueue and engine is properly
> configured then the device will be enabled and ready to go.
>
> The IAA implementation, idxd_load_iaa_device_defaults(), configures a
> single workqueue (wq0) for each device with the following default
> values:
>
> mode "dedicated"
> threshold 0
> size 16
> priority 10
> type IDXD_WQT_KERNEL
> group 0
> name "iaa_crypto"
> driver_name "crypto"
>
> Note that this now adds another configuration step for any users that
> want to configure their own devices/workqueus with something different
> in that they'll first need to disable (in the case of IAA) wq0 and the
> device itself before they can set their own attributes and re-enable,
> since they've been already been auto-enabled. Note also that in order
> for the new configuration to be applied to the deflate-iaa crypto
> algorithm the iaa_crypto module needs to unregister the old version,
> which is accomplished by removing the iaa_crypto module, and
> re-registering it with the new configuration by reinserting the
> iaa_crypto module.
>
> Signed-off-by: Tom Zanussi <tom.zanussi@xxxxxxxxxxxxxxx>
Reviewed-by: Dave Jiang <dave.jiang@xxxxxxxxx>
> ---
> drivers/dma/idxd/Makefile | 2 +-
> drivers/dma/idxd/defaults.c | 53 +++++++++++++++++++++++++++++++++++++
> drivers/dma/idxd/idxd.h | 4 +++
> drivers/dma/idxd/init.c | 7 +++++
> 4 files changed, 65 insertions(+), 1 deletion(-)
> create mode 100644 drivers/dma/idxd/defaults.c
>
> diff --git a/drivers/dma/idxd/Makefile b/drivers/dma/idxd/Makefile
> index c5e679070e46..2b4a0d406e1e 100644
> --- a/drivers/dma/idxd/Makefile
> +++ b/drivers/dma/idxd/Makefile
> @@ -4,7 +4,7 @@ obj-$(CONFIG_INTEL_IDXD_BUS) += idxd_bus.o
> idxd_bus-y := bus.o
>
> obj-$(CONFIG_INTEL_IDXD) += idxd.o
> -idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o debugfs.o
> +idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o debugfs.o defaults.o
>
> idxd-$(CONFIG_INTEL_IDXD_PERFMON) += perfmon.o
>
> diff --git a/drivers/dma/idxd/defaults.c b/drivers/dma/idxd/defaults.c
> new file mode 100644
> index 000000000000..a0c9faad8efe
> --- /dev/null
> +++ b/drivers/dma/idxd/defaults.c
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright(c) 2023 Intel Corporation. All rights rsvd. */
> +#include <linux/kernel.h>
> +#include "idxd.h"
> +
> +int idxd_load_iaa_device_defaults(struct idxd_device *idxd)
> +{
> + struct idxd_engine *engine;
> + struct idxd_group *group;
> + struct idxd_wq *wq;
> +
> + if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
> + return 0;
> +
> + wq = idxd->wqs[0];
> +
> + if (wq->state != IDXD_WQ_DISABLED)
> + return -EPERM;
> +
> + /* set mode to "dedicated" */
> + set_bit(WQ_FLAG_DEDICATED, &wq->flags);
> + wq->threshold = 0;
> +
> + /* set size to 16 */
> + wq->size = 16;
> +
> + /* set priority to 10 */
> + wq->priority = 10;
> +
> + /* set type to "kernel" */
> + wq->type = IDXD_WQT_KERNEL;
> +
> + /* set wq group to 0 */
> + group = idxd->groups[0];
> + wq->group = group;
> + group->num_wqs++;
> +
> + /* set name to "iaa_crypto" */
> + memset(wq->name, 0, WQ_NAME_SIZE + 1);
> + strscpy(wq->name, "iaa_crypto", WQ_NAME_SIZE + 1);
> +
> + /* set driver_name to "crypto" */
> + memset(wq->driver_name, 0, DRIVER_NAME_SIZE + 1);
> + strscpy(wq->driver_name, "crypto", DRIVER_NAME_SIZE + 1);
> +
> + engine = idxd->engines[0];
> +
> + /* set engine group to 0 */
> + engine->group = idxd->groups[0];
> + engine->group->num_engines++;
> +
> + return 0;
> +}
> diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
> index 62ea21b25906..47de3f93ff1e 100644
> --- a/drivers/dma/idxd/idxd.h
> +++ b/drivers/dma/idxd/idxd.h
> @@ -277,6 +277,8 @@ struct idxd_dma_dev {
> struct dma_device dma;
> };
>
> +typedef int (*load_device_defaults_fn_t) (struct idxd_device *idxd);
> +
> struct idxd_driver_data {
> const char *name_prefix;
> enum idxd_type type;
> @@ -286,6 +288,7 @@ struct idxd_driver_data {
> int evl_cr_off;
> int cr_status_off;
> int cr_result_off;
> + load_device_defaults_fn_t load_device_defaults;
> };
>
> struct idxd_evl {
> @@ -730,6 +733,7 @@ void idxd_unregister_devices(struct idxd_device *idxd);
> void idxd_wqs_quiesce(struct idxd_device *idxd);
> bool idxd_queue_int_handle_resubmit(struct idxd_desc *desc);
> void multi_u64_to_bmap(unsigned long *bmap, u64 *val, int count);
> +int idxd_load_iaa_device_defaults(struct idxd_device *idxd);
>
> /* device interrupt control */
> irqreturn_t idxd_misc_thread(int vec, void *data);
> diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
> index 0eb1c827a215..14df1f1347a8 100644
> --- a/drivers/dma/idxd/init.c
> +++ b/drivers/dma/idxd/init.c
> @@ -59,6 +59,7 @@ static struct idxd_driver_data idxd_driver_data[] = {
> .evl_cr_off = offsetof(struct iax_evl_entry, cr),
> .cr_status_off = offsetof(struct iax_completion_record, status),
> .cr_result_off = offsetof(struct iax_completion_record, error_code),
> + .load_device_defaults = idxd_load_iaa_device_defaults,
> },
> };
>
> @@ -745,6 +746,12 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> goto err;
> }
>
> + if (data->load_device_defaults) {
> + rc = data->load_device_defaults(idxd);
> + if (rc)
> + dev_warn(dev, "IDXD loading device defaults failed\n");
> + }
> +
> rc = idxd_register_devices(idxd);
> if (rc) {
> dev_err(dev, "IDXD sysfs setup failed\n");