Re: [PATCH V13 14/21] mmc: sdhci-uhs2: add set_ios()

From: Adrian Hunter
Date: Tue Nov 28 2023 - 04:13:02 EST

Next message: Greg Kroah-Hartman: "Re: [PATCH V3 3/5] misc: mlx5ctl: Add info ioctl"
Previous message: Adrian Hunter: "Re: [PATCH V13 12/21] mmc: sdhci-uhs2: add set_power() to support vdd2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 17/11/23 13:31, Victor Shih wrote:
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> This is a sdhci version of mmc's set_ios operation.
> THis is used to handle basic IO bus setting.
> It covers both UHS-I and UHS-II.
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Updates in V13:
> - Add judgment condition for power mode in the __sdhci_uhs2_set_ios().
> - Modify comment message.
>
> Updates in V9:
> - Simplity the turning_on_clk in sdhci_set_ios().
>
> Updates in V8:
> - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
> and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios().
> - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
> and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value().
> - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr()
> in sdhci_uhs2_set_ios().
>
> Updates in V7:
> - Remove unnecessary functions.
>
> Updates in V6:
> - Modify return value in some functions.
> - Remove unnecessary functions.
>
> ---
>
> drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-uhs2.h | 1 +
> drivers/mmc/host/sdhci.c | 55 ++++++++++++--------
> drivers/mmc/host/sdhci.h | 2 +
> 4 files changed, 132 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 5a79dd29aa38..a55b910f3615 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -214,6 +214,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> }
> EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
>
> +/**
> + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
> + * @host: SDHCI host
> + * @clear: bit-wise clear mask
> + * @set: bit-wise set mask
> + *
> + * Set/unset bits in UHS-II Error Interrupt Status Enable register
> + */
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> +{
> + u32 ier;
> +
> + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
> + ier &= ~clear;
> + ier |= set;
> + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
> + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
> +
> +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + u8 cmd_res, dead_lock;
> + u16 ctrl_2;
> +
> + /* UHS2 Timeout Control */
> + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
> +
> + /* change to use calculate value */
> + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
> +
> + sdhci_uhs2_clear_set_irqs(host,
> + SDHCI_UHS2_INT_CMD_TIMEOUT |
> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
> + 0);
> + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
> + sdhci_uhs2_clear_set_irqs(host, 0,
> + SDHCI_UHS2_INT_CMD_TIMEOUT |
> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
> +
> + /* UHS2 timing. Note, UHS2 timing is disabled when powering off */
> + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + if (ios->power_mode != MMC_POWER_OFF &&
> + (ios->timing == MMC_TIMING_UHS2_SPEED_A ||
> + ios->timing == MMC_TIMING_UHS2_SPEED_A_HD ||
> + ios->timing == MMC_TIMING_UHS2_SPEED_B ||
> + ios->timing == MMC_TIMING_UHS2_SPEED_B_HD))
> + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
> + else
> + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
> + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> + host->timing = ios->timing;
> +
> + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
> + sdhci_enable_preset_value(host, true);
> +
> + if (host->ops->set_power)
> + host->ops->set_power(host, ios->power_mode, ios->vdd);
> + else
> + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
> +
> + sdhci_set_clock(host, host->clock);
> +}
> +
> +static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n",
> + mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing);
> +
> + if (!sdhci_uhs2_mode(host)) {
> + sdhci_set_ios(mmc, ios);
> + return 0;
> + }
> +
> + if (ios->power_mode == MMC_POWER_UNDEFINED)
> + return 0;
> +
> + if (host->flags & SDHCI_DEVICE_DEAD) {
> + if (ios->power_mode == MMC_POWER_OFF) {
> + mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> + mmc_regulator_set_vqmmc2(mmc, ios);

mmc_regulator_set_vqmmc2() only sets the voltage, it doesn't
disable the regulator.

> + }
> + return -1;
> + }
> +
> + sdhci_set_ios_common(mmc, ios);
> +
> + __sdhci_uhs2_set_ios(mmc, ios);
> +
> + return 0;
> +}
> +
> /*****************************************************************************\
> * *
> * Driver init/exit *
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index ccf4e1834c2d..a3641c5f8c77 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> bool sdhci_uhs2_mode(struct sdhci_host *host);
> void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
> void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
>
> #endif /* __SDHCI_UHS2_H */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 4d50cac7717d..64704f6537e0 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -47,8 +47,6 @@
> static unsigned int debug_quirks = 0;
> static unsigned int debug_quirks2;
>
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> -
> static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
>
> void sdhci_dumpregs(struct sdhci_host *host)
> @@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> case MMC_TIMING_MMC_HS400:
> preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
> break;
> + case MMC_TIMING_UHS2_SPEED_A:
> + case MMC_TIMING_UHS2_SPEED_A_HD:
> + case MMC_TIMING_UHS2_SPEED_B:
> + case MMC_TIMING_UHS2_SPEED_B_HD:
> + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
> + break;
> default:
> pr_warn("%s: Invalid UHS-I mode selected\n",
> mmc_hostname(host->mmc));
> @@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
> (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
> }
>
> -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> - bool reinit_uhs = host->reinit_uhs;
> - bool turning_on_clk = false;
> - u8 ctrl;
> -
> - host->reinit_uhs = false;
> -
> - if (ios->power_mode == MMC_POWER_UNDEFINED)
> - return;
> -
> - if (host->flags & SDHCI_DEVICE_DEAD) {
> - if (!IS_ERR(mmc->supply.vmmc) &&
> - ios->power_mode == MMC_POWER_OFF)
> - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> - return;
> - }
>
> /*
> * Reset the chip on each power off.
> @@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> sdhci_enable_preset_value(host, false);
>
> if (!ios->clock || ios->clock != host->clock) {
> - turning_on_clk = ios->clock && !host->clock;
> -
> host->ops->set_clock(host, ios->clock);
> host->clock = ios->clock;
>
> @@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> mmc->max_busy_timeout /= host->timeout_clk;
> }
> }
> +}
> +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
> +
> +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + bool reinit_uhs = host->reinit_uhs;
> + bool turning_on_clk;
> + u8 ctrl;
> +
> + host->reinit_uhs = false;
> +
> + if (ios->power_mode == MMC_POWER_UNDEFINED)
> + return;
> +
> + if (host->flags & SDHCI_DEVICE_DEAD) {
> + if (!IS_ERR(mmc->supply.vmmc) &&
> + ios->power_mode == MMC_POWER_OFF)
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> + return;
> + }
> +
> + turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock;
> +
> + sdhci_set_ios_common(mmc, ios);
>
> if (host->ops->set_power)
> host->ops->set_power(host, ios->power_mode, ios->vdd);
> @@ -2958,7 +2970,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
> }
> EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
>
> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> {
> /* Host Controller v3.00 defines preset value registers */
> if (host->version < SDHCI_SPEC_300)
> @@ -2986,6 +2998,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
> host->preset_enabled = enable;
> }
> }
> +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
>
> static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
> int err)
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index cdb418d97c4d..b2e425dfac95 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask);
> void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
> int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
> int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
> void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
> int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
> struct mmc_ios *ios);

Next message: Greg Kroah-Hartman: "Re: [PATCH V3 3/5] misc: mlx5ctl: Add info ioctl"
Previous message: Adrian Hunter: "Re: [PATCH V13 12/21] mmc: sdhci-uhs2: add set_power() to support vdd2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]