Re: [PATCH v4 1/2] dt-bindings: iio: pressure: add honeywell,hsc030

[Rob Herring]

On Tue, Nov 28, 2023 at 02:40:37PM +0200, Petre Rodan wrote:
> Adds binding for digital Honeywell TruStability HSC and SSC series
> pressure and temperature sensors. 
> Communication is one way. The sensor only requires 4 bytes worth of
> clock pulses on both i2c and spi in order to push the data out.
> The i2c address is hardcoded and depends on the part number.
> There is no additional GPIO control.
> 
> Datasheet:
> https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC]
> Datasheet:
> https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC]
> Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
> ---
> V2: - fix yaml struct
>     - cleanup based on Krzysztof's review
> V3: - rename range_str -> honeywell,pressure-triplet to define the string
>        containing the pressure range, measurement unit and type
>     - honeywell,pmax-pascal becomes uint32
> V4: - added enum to honeywell,transfer-function
> ---
>  .../iio/pressure/honeywell,hsc030pa.yaml      | 134 ++++++++++++++++++
>  1 file changed, 134 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
> new file mode 100644
> index 000000000000..418fb1d2eefd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Honeywell TruStability HSC and SSC pressure sensor series
> +
> +description: |
> +  support for Honeywell TruStability HSC and SSC digital pressure sensor
> +  series.
> +
> +  These sensors have either an I2C, an SPI or an analog interface. Only the
> +  digital versions are supported by this driver.
> +
> +  There are 118 models with different pressure ranges available in each family.
> +  The vendor calls them "HSC series" and "SSC series". All of them have an
> +  identical programming model but differ in pressure range, unit and transfer
> +  function.
> +
> +  To support different models one needs to specify the pressure range as well
> +  as the transfer function. Pressure range can either be provided via
> +  pressure-triplet (directly extracted from the part number) or in case it's
> +  a custom chip via numerical range limits converted to pascals.
> +
> +  The transfer function defines the ranges of raw conversion values delivered
> +  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
> +  maximum pressure that can be measured.
> +
> +  Please note that in case of an SPI-based sensor, the clock signal should not
> +  exceed 800kHz and the MOSI signal is not required.
> +
> +  Specifications about the devices can be found at:
> +  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
> +  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
> +
> +maintainers:
> +  - Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: honeywell,hsc030pa
> +
> +  reg:
> +    maxItems: 1
> +
> +  honeywell,transfer-function:
> +    description: |
> +      Transfer function which defines the range of valid values delivered by
> +      the sensor.
> +      0 - A, 10% to 90% of 2^14
> +      1 - B, 5% to 95% of 2^14
> +      2 - C, 5% to 85% of 2^14
> +      3 - F, 4% to 94% of 2^14
> +    enum: [0, 1, 2, 3]
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  honeywell,pressure-triplet:
> +    description: |
> +      Case-sensitive five character string that defines pressure range, unit
> +      and type as part of the device nomenclature. In the unlikely case of a
> +      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
> +    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
> +           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
> +           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
> +           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
> +           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
> +           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
> +           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
> +           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
> +           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
> +           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
> +           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
> +           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
> +           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
> +           150PG, NA]
> +    $ref: /schemas/types.yaml#/definitions/string
> +
> +  honeywell,pmin-pascal:
> +    description: |
> +      Minimum pressure value the sensor can measure in pascal.
> +      To be specified only if honeywell,pressure-triplet is set to "NA".

This constraint can be expressed as:

dependentSchemas:
  honeywell,pmin-pascal:
    properties:
      honeywell,pressure-triplet:
        const: NA

And similar for honeywell,pmax-pascal

> +    $ref: /schemas/types.yaml#/definitions/int32
> +
> +  honeywell,pmax-pascal:
> +    description: |
> +      Maximum pressure value the sensor can measure in pascal.
> +      To be specified only if honeywell,pressure-triplet is set to "NA".
> +    $ref: /schemas/types.yaml#/definitions/uint32