[PATCH v1 3/3] hwmon: tmp513: Use SI constants from units.h

[Andy Shevchenko]

MILLI and MICRO may be used in the driver to make code more robust
against possible miscalculations.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/hwmon/tmp513.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c
index 6e01800404fc..e0abdb27131e 100644
--- a/drivers/hwmon/tmp513.c
+++ b/drivers/hwmon/tmp513.c
@@ -32,6 +32,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 // Common register definition
 #define TMP51X_SHUNT_CONFIG		0x00
@@ -101,8 +102,8 @@
 #define TMP51X_REMOTE_TEMP_LIMIT_2_POS		8
 #define TMP513_REMOTE_TEMP_LIMIT_3_POS		7
 
-#define TMP51X_VBUS_RANGE_32V		32000000
-#define TMP51X_VBUS_RANGE_16V		16000000
+#define TMP51X_VBUS_RANGE_32V		(32 * MICRO)
+#define TMP51X_VBUS_RANGE_16V		(16 * MICRO)
 
 // Max and Min value
 #define MAX_BUS_VOLTAGE_32_LIMIT	32764
@@ -204,7 +205,7 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos,
 		 * on the pga gain setting. 1lsb = 10uV
 		 */
 		*val = sign_extend32(regval, 17 - tmp51x_get_pga_shift(data));
-		*val = DIV_ROUND_CLOSEST(*val * 10000, data->shunt_uohms);
+		*val = DIV_ROUND_CLOSEST(*val * 10 * MILLI, data->shunt_uohms);
 		break;
 	case TMP51X_BUS_VOLTAGE_RESULT:
 	case TMP51X_BUS_VOLTAGE_H_LIMIT:
@@ -220,7 +221,7 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos,
 	case TMP51X_BUS_CURRENT_RESULT:
 		// Current = (ShuntVoltage * CalibrationRegister) / 4096
 		*val = sign_extend32(regval, 16) * data->curr_lsb_ua;
-		*val = DIV_ROUND_CLOSEST(*val, 1000);
+		*val = DIV_ROUND_CLOSEST(*val, MILLI);
 		break;
 	case TMP51X_LOCAL_TEMP_RESULT:
 	case TMP51X_REMOTE_TEMP_RESULT_1:
@@ -260,7 +261,7 @@ static int tmp51x_set_value(struct tmp51x_data *data, u8 reg, long val)
 		 * The user enter current value and we convert it to
 		 * voltage. 1lsb = 10uV
 		 */
-		val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10000);
+		val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10 * MILLI);
 		max_val = U16_MAX >> tmp51x_get_pga_shift(data);
 		regval = clamp_val(val, -max_val, max_val);
 		break;
@@ -550,18 +551,16 @@ static int tmp51x_calibrate(struct tmp51x_data *data)
 	if (data->shunt_uohms == 0)
 		return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION, 0);
 
-	max_curr_ma = DIV_ROUND_CLOSEST_ULL(vshunt_max * 1000 * 1000,
-					    data->shunt_uohms);
+	max_curr_ma = DIV_ROUND_CLOSEST_ULL(vshunt_max * MICRO, data->shunt_uohms);
 
 	/*
 	 * Calculate the minimal bit resolution for the current and the power.
 	 * Those values will be used during register interpretation.
 	 */
-	data->curr_lsb_ua = DIV_ROUND_CLOSEST_ULL(max_curr_ma * 1000, 32767);
+	data->curr_lsb_ua = DIV_ROUND_CLOSEST_ULL(max_curr_ma * MILLI, 32767);
 	data->pwr_lsb_uw = 20 * data->curr_lsb_ua;
 
-	div = DIV_ROUND_CLOSEST_ULL(data->curr_lsb_ua * data->shunt_uohms,
-				    1000 * 1000);
+	div = DIV_ROUND_CLOSEST_ULL(data->curr_lsb_ua * data->shunt_uohms, MICRO);
 
 	return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION,
 			    DIV_ROUND_CLOSEST(40960, div));
@@ -678,7 +677,7 @@ static int tmp51x_read_properties(struct device *dev, struct tmp51x_data *data)
 				       data->max_channels - 1);
 
 	// Check if shunt value is compatible with pga-gain
-	if (data->shunt_uohms > data->pga_gain * 40 * 1000 * 1000) {
+	if (data->shunt_uohms > data->pga_gain * 40 * MICRO) {
 		return dev_err_probe(dev, -EINVAL,
 				     "shunt-resistor: %u too big for pga_gain: %u\n",
 				     data->shunt_uohms, data->pga_gain);
-- 
2.43.0.rc1.1.gbec44491f096