[net-next PATCH 08/14] net: phy: at803x: drop specific PHY id check from cable test functions

[Christian Marangi]

Drop specific PHY id check for cable test functions for at803x. This is
done to make functions more generic.

PHYs that requires to set additional reg are moved to specific function
calling the more generic one.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 drivers/net/phy/at803x.c | 48 +++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index e7d006ca1676..8f5878ccb1a8 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1263,19 +1263,11 @@ static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
 }
 
 static int at803x_cable_test_get_status(struct phy_device *phydev,
-					bool *finished)
+					bool *finished, unsigned long pair_mask)
 {
-	unsigned long pair_mask;
 	int retries = 20;
 	int pair, ret;
 
-	if (phydev->phy_id == ATH9331_PHY_ID ||
-	    phydev->phy_id == ATH8032_PHY_ID ||
-	    phydev->phy_id == QCA9561_PHY_ID)
-		pair_mask = 0x3;
-	else
-		pair_mask = 0xf;
-
 	*finished = false;
 
 	/* According to the datasheet the CDT can be performed when
@@ -1310,10 +1302,6 @@ static int at803x_cable_test_start(struct phy_device *phydev)
 	 */
 	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
 	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
-	if (phydev->phy_id != ATH9331_PHY_ID &&
-	    phydev->phy_id != ATH8032_PHY_ID &&
-	    phydev->phy_id != QCA9561_PHY_ID)
-		phy_write(phydev, MII_CTRL1000, 0);
 
 	/* we do all the (time consuming) work later */
 	return 0;
@@ -1664,6 +1652,26 @@ static int at8031_set_wol(struct phy_device *phydev,
 	return at803x_set_wol(phydev, wol);
 }
 
+static int at8031_cable_test_get_status(struct phy_device *phydev,
+					bool *finished)
+{
+	return at803x_cable_test_get_status(phydev, finished, 0xf);
+}
+
+static int at8031_cable_test_start(struct phy_device *phydev)
+{
+	at803x_cable_test_start(phydev);
+	phy_write(phydev, MII_CTRL1000, 0);
+
+	return 0;
+}
+
+static int at8032_cable_test_get_status(struct phy_device *phydev,
+					bool *finished)
+{
+	return at803x_cable_test_get_status(phydev, finished, 0x3);
+}
+
 static int at8035_parse_dt(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;
@@ -2205,8 +2213,8 @@ static struct phy_driver at803x_driver[] = {
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
 	.set_tunable		= at803x_set_tunable,
-	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at803x_cable_test_get_status,
+	.cable_test_start	= at8031_cable_test_start,
+	.cable_test_get_status	= at8031_cable_test_get_status,
 }, {
 	/* Qualcomm Atheros AR8030 */
 	.phy_id			= ATH8030_PHY_ID,
@@ -2243,8 +2251,8 @@ static struct phy_driver at803x_driver[] = {
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
 	.set_tunable		= at803x_set_tunable,
-	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at803x_cable_test_get_status,
+	.cable_test_start	= at8031_cable_test_start,
+	.cable_test_get_status	= at8031_cable_test_get_status,
 }, {
 	/* Qualcomm Atheros AR8032 */
 	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
@@ -2259,7 +2267,7 @@ static struct phy_driver at803x_driver[] = {
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at803x_cable_test_get_status,
+	.cable_test_get_status	= at8032_cable_test_get_status,
 }, {
 	/* ATHEROS AR9331 */
 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
@@ -2272,7 +2280,7 @@ static struct phy_driver at803x_driver[] = {
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at803x_cable_test_get_status,
+	.cable_test_get_status	= at8032_cable_test_get_status,
 	.read_status		= at803x_read_status,
 	.soft_reset		= genphy_soft_reset,
 	.config_aneg		= at803x_config_aneg,
@@ -2288,7 +2296,7 @@ static struct phy_driver at803x_driver[] = {
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.cable_test_start	= at803x_cable_test_start,
-	.cable_test_get_status	= at803x_cable_test_get_status,
+	.cable_test_get_status	= at8032_cable_test_get_status,
 	.read_status		= at803x_read_status,
 	.soft_reset		= genphy_soft_reset,
 	.config_aneg		= at803x_config_aneg,
-- 
2.40.1