[PATCH 1/2] arm64: dts: imx8mp: Add DT nodes for the two ISPs
From: Paul Elder
Date: Wed Nov 29 2023 - 04:32:32 EST
The ISP supports both CSI and parallel interfaces, where port 0
corresponds to the former and port 1 corresponds to the latter. Since
the i.MX8MP's ISPs are connected by the parallel interface to the CSI
receiver, set them both to port 1.
Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 50 +++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c9a610ba4836..25579d4c58f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1604,6 +1604,56 @@ isi_in_1: endpoint {
};
};
+ isp_0: isp@32e10000 {
+ compatible = "fsl,imx8mp-isp";
+ reg = <0x32e10000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ clock-names = "isp", "aclk", "hclk";
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ fsl,blk-ctrl = <&media_blk_ctrl 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ isp_1: isp@32e20000 {
+ compatible = "fsl,imx8mp-isp";
+ reg = <0x32e20000 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ clock-names = "isp", "aclk", "hclk";
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+ fsl,blk-ctrl = <&media_blk_ctrl 1>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
dewarp: dwe@32e30000 {
compatible = "nxp,imx8mp-dw100";
reg = <0x32e30000 0x10000>;
--
2.39.2