Re: [net-next PATCH 06/14] net: phy: at803x: move at8031 specific data out of generic at803x_priv

[Christian Marangi]

On Wed, Nov 29, 2023 at 09:35:37AM +0000, Russell King (Oracle) wrote:
> On Wed, Nov 29, 2023 at 03:12:11AM +0100, Christian Marangi wrote:
> > Rework everything related to specific at8031 function to specific
> > function and allocate the 2 bool, is_1000basex and is_fiber and the
> > regulator structs to a dedicated qca8031_data struct.
> > 
> > This is needed to keep at803x functions more generic and detach them
> > from specific check of at8031/33 PHY.
> > 
> > Out of all the reworked functions, only config_aneg required some code
> > duplication with how the mdix config is handled.
> > 
> > This also reduces the generic at803x_priv struct by removing variables
> > only used by at8031 PHY.
> 
> You are changing the order that register writes happen, e.g. for the
> set_wol() method. at803x_set_wol() very clearly does stuff like
> configuring the ethernet MAC address _before_ enabling WoL, and that
> can fail. Your new code enables WoL and then calls at803x_set_wol().
> If at803x_set_wol() fails (e.g. because of an invalid MAC address)
> you leave WoL enabled. This is a change of behaviour.
>

Have to think about it, changing the order of the WoL module enable and
setting the MAC should not change anything as the real enablement is the
WoL interrupt. (I guess this is why the WoL module is enabled by default
as the interrupt is disabled by default resulting in the module doing
nothing)

> I haven't checked anything else, but given the above, I think you
> need to think more about how you make this change, and check
> whether there are any other similar issues.
> 

Would it be better to split this in more smaller commit? One for moving
the at8031 function and the other for refactor of some function? 

-- 
	Ansuel