[PATCH net-next v13 04/13] rtase: Implement the interrupt routine and rtase_poll

[Justin Lai]

1. Implement rtase_interrupt to handle txQ0/rxQ0, txQ4~txQ7 interrupts,
and implement rtase_q_interrupt to handle txQ1/rxQ1, txQ2/rxQ2 and
txQ3/rxQ3 interrupts.
2. Implement rtase_poll to call ring_handler to process the tx or
rx packet of each ring. If the returned value is budget,it means that
there is still work of a certain ring that has not yet been completed.

Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
---
 .../net/ethernet/realtek/rtase/rtase_main.c   | 89 +++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index d6c26d63e7b4..e01c612cd471 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -582,6 +582,76 @@ static void rtase_hw_start(const struct net_device *dev)
 	rtase_enable_hw_interrupt(tp);
 }
 
+/*  the interrupt handler does RXQ0 and TXQ0, TXQ4~7 interrutp status
+ */
+static irqreturn_t rtase_interrupt(int irq, void *dev_instance)
+{
+	const struct rtase_private *tp;
+	struct rtase_int_vector *ivec;
+	u32 status;
+
+	ivec = dev_instance;
+	tp = ivec->tp;
+	status = rtase_r32(tp, ivec->isr_addr);
+
+	rtase_w32(tp, ivec->imr_addr, 0x0);
+	rtase_w32(tp, ivec->isr_addr, status & ~FOVW);
+
+	if (napi_schedule_prep(&ivec->napi))
+		__napi_schedule(&ivec->napi);
+
+	return IRQ_HANDLED;
+}
+
+/*  the interrupt handler does RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 interrupt
+ *  status according to interrupt vector
+ */
+static irqreturn_t rtase_q_interrupt(int irq, void *dev_instance)
+{
+	const struct rtase_private *tp;
+	struct rtase_int_vector *ivec;
+	u16 status;
+
+	ivec = dev_instance;
+	tp = ivec->tp;
+	status = rtase_r16(tp, ivec->isr_addr);
+
+	rtase_w16(tp, ivec->imr_addr, 0x0);
+	rtase_w16(tp, ivec->isr_addr, status);
+
+	if (napi_schedule_prep(&ivec->napi))
+		__napi_schedule(&ivec->napi);
+
+	return IRQ_HANDLED;
+}
+
+static int rtase_poll(struct napi_struct *napi, int budget)
+{
+	const struct rtase_int_vector *ivec;
+	const struct rtase_private *tp;
+	struct rtase_ring *ring;
+	int total_workdone = 0;
+
+	ivec = container_of(napi, struct rtase_int_vector, napi);
+	tp = ivec->tp;
+
+	list_for_each_entry(ring, &ivec->ring_list, ring_entry) {
+		total_workdone += ring->ring_handler(ring, budget);
+	}
+
+	if (total_workdone >= budget)
+		return budget;
+
+	if (napi_complete_done(napi, total_workdone)) {
+		if (!ivec->index)
+			rtase_w32(tp, ivec->imr_addr, ivec->imr);
+		else
+			rtase_w16(tp, ivec->imr_addr, ivec->imr);
+	}
+
+	return total_workdone;
+}
+
 static int rtase_open(struct net_device *dev)
 {
 	struct rtase_private *tp = netdev_priv(dev);
@@ -721,9 +791,28 @@ static void rtase_rar_set(const struct rtase_private *tp, const u8 *addr)
 	rtase_w16(tp, RTASE_LBK_CTRL, LBK_ATLD | LBK_CLR);
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void rtase_netpoll(struct net_device *dev)
+{
+	const struct rtase_private *tp = netdev_priv(dev);
+	const struct pci_dev *pdev = tp->pdev;
+
+	disable_irq(pdev->irq);
+	rtase_interrupt(pdev->irq, dev);
+	enable_irq(pdev->irq);
+}
+#endif
+
 static const struct net_device_ops rtase_netdev_ops = {
 	.ndo_open = rtase_open,
 	.ndo_stop = rtase_close,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = rtase_netpoll,
+#endif
 };
 
 static void rtase_get_mac_address(struct net_device *dev)
-- 
2.34.1