[PATCH 4/7] serial: sc16is7xx: add macro for max number of UART ports

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Add macro to hold the maximum number of UART ports per IC/device.

Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index eb2c0dcd3775..750c55b93f5e 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -28,6 +28,7 @@
 
 #define SC16IS7XX_NAME			"sc16is7xx"
 #define SC16IS7XX_MAX_DEVS		8
+#define SC16IS7XX_MAX_PORTS		2 /* Maximum number of UART ports per IC. */
 
 /* SC16IS7XX register definitions */
 #define SC16IS7XX_RHR_REG		(0x00) /* RX FIFO */
@@ -1399,7 +1400,7 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s)
 	int i;
 	int ret;
 	int count;
-	u32 irda_port[2];
+	u32 irda_port[SC16IS7XX_MAX_PORTS];
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "irda-mode-ports");
@@ -1426,7 +1427,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 	int i;
 	int ret;
 	int count;
-	u32 mctrl_port[2];
+	u32 mctrl_port[SC16IS7XX_MAX_PORTS];
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "nxp,modem-control-line-ports");
@@ -1716,7 +1717,7 @@ static unsigned int sc16is7xx_regmap_port_mask(unsigned int port_id)
 static int sc16is7xx_spi_probe(struct spi_device *spi)
 {
 	const struct sc16is7xx_devtype *devtype;
-	struct regmap *regmaps[2];
+	struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
 	unsigned int i;
 	int ret;
 
@@ -1791,7 +1792,7 @@ static int sc16is7xx_i2c_probe(struct i2c_client *i2c)
 {
 	const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
 	const struct sc16is7xx_devtype *devtype;
-	struct regmap *regmaps[2];
+	struct regmap *regmaps[SC16IS7XX_MAX_PORTS];
 	unsigned int i;
 
 	if (i2c->dev.of_node) {
-- 
2.39.2