Re: [Linux-stm32] [PATCH v1 2/2] net: stmmac: Add NPCM support

[Maxime Chevallier]

Hello,

On Thu, 30 Nov 2023 22:59:32 +0300
Serge Semin <fancer.lancer@xxxxxxxxx> wrote:

> On Thu, Nov 30, 2023 at 06:26:13PM +0100, Andrew Lunn wrote:
> > > I will check with the xpcs maintainer how can we add indirect access
> > > to the xpcs module.  
> > 
> > https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c#L449
> > 
> > It creates a regmap for the memory range. On top of that it creates an
> > MDIO bus. You can then access the PCS in the normal way.  
> 
> Actually Synopsys DW XPCS can be synthesized with two types of the CSR
> interfaces:
> 1. MDIO: device looks as a normal MDIO device. This option is currently
>    supported by the STMMAC MDIO driver.
> 2. MCI/APB3: device MMD CSRs are directly (all CSRs are visible) or
>    indirectly (paged-base access) accessible over the system memory bus.
> 
> In addition to the above XPCS device can be equipped with separate
> clock sources (at least to feed the MCI or APB3 interface) and may
> have dedicated IRQ line to signal various events like link
> establishing, failures, etc. From that perspective XPCS in both cases
> looks as a normal platform device for which would be better to have a
> special DT-node defined with all those resources supplied. Then the
> XPCS DT-node could be passed to the DW MAC DT-node via the already
> standardized "pcs-handle" DT-property.

To my understanding, this should work, there's another PCS that works
this way : 
https://elixir.bootlin.com/linux/v6.7-rc3/source/drivers/net/pcs/pcs-rzn1-miic.c

Are you still able to use the mdio-regmap glue that Andrew mentioned,
to avoid the duplication between the mdio and mmio register accesses ?

Maxime