[net-next PATCH v2 02/12] net: phy: at803x: move disable WOL to specific at8031 probe

[Christian Marangi]

Move the WOL disable call to specific at8031 probe to make at803x_probe
more generic and drop extra check for PHY ID.

Keep the same previous behaviour by first calling at803x_probe and then
disabling WOL.

Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 drivers/net/phy/at803x.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index ef203b0807e5..85302d96d133 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -886,15 +886,6 @@ static int at803x_probe(struct phy_device *phydev)
 			priv->is_fiber = true;
 			break;
 		}
-
-		/* Disable WoL in 1588 register which is enabled
-		 * by default
-		 */
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-				     AT803X_PHY_MMD3_WOL_CTRL,
-				     AT803X_WOL_EN, 0);
-		if (ret)
-			return ret;
 	}
 
 	return 0;
@@ -1591,6 +1582,24 @@ static int at803x_cable_test_start(struct phy_device *phydev)
 	return 0;
 }
 
+static int at8031_probe(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = at803x_probe(phydev);
+	if (ret)
+		return ret;
+
+	/* Disable WoL in 1588 register which is enabled
+	 * by default
+	 */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+			     AT803X_PHY_MMD3_WOL_CTRL,
+			     AT803X_WOL_EN, 0);
+
+	return ret;
+}
+
 static int qca83xx_config_init(struct phy_device *phydev)
 {
 	u8 switch_revision;
@@ -2092,7 +2101,7 @@ static struct phy_driver at803x_driver[] = {
 	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
 	.name			= "Qualcomm Atheros AR8031/AR8033",
 	.flags			= PHY_POLL_CABLE_TEST,
-	.probe			= at803x_probe,
+	.probe			= at8031_probe,
 	.config_init		= at803x_config_init,
 	.config_aneg		= at803x_config_aneg,
 	.soft_reset		= genphy_soft_reset,
-- 
2.40.1