Re: [PATCH v1 2/3] hwmon: tmp513: Simplify with dev_err_probe()

[Guenter Roeck]

On Tue, Nov 28, 2023 at 08:06:03PM +0200, Andy Shevchenko wrote:
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe().  Less code and also it prints the error value.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

Applied, but ...

> ---
>  drivers/hwmon/tmp513.c | 34 ++++++++++++++--------------------
>  1 file changed, 14 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c
> index 849a8c3e1020..6e01800404fc 100644
> --- a/drivers/hwmon/tmp513.c
> +++ b/drivers/hwmon/tmp513.c
> @@ -630,9 +630,9 @@ static int tmp51x_vbus_range_to_reg(struct device *dev,
>  	} else if (data->vbus_range_uvolt == TMP51X_VBUS_RANGE_16V) {
>  		data->shunt_config &= ~TMP51X_BUS_VOLTAGE_MASK;
>  	} else {
> -		dev_err(dev, "ti,bus-range-microvolt is invalid: %u\n",
> -			data->vbus_range_uvolt);
> -		return -EINVAL;
> +		return dev_err_probe(dev, -EINVAL,
> +				     "ti,bus-range-microvolt is invalid: %u\n",
> +				     data->vbus_range_uvolt);
>  	}
>  	return 0;
>  }
> @@ -648,8 +648,8 @@ static int tmp51x_pga_gain_to_reg(struct device *dev, struct tmp51x_data *data)
>  	} else if (data->pga_gain == 1) {
>  		data->shunt_config |= CURRENT_SENSE_VOLTAGE_40_MASK;
>  	} else {
> -		dev_err(dev, "ti,pga-gain is invalid: %u\n", data->pga_gain);
> -		return -EINVAL;
> +		return dev_err_probe(dev, -EINVAL,
> +				     "ti,pga-gain is invalid: %u\n", data->pga_gain);
>  	}
>  	return 0;
>  }
> @@ -679,9 +679,9 @@ static int tmp51x_read_properties(struct device *dev, struct tmp51x_data *data)
>  
>  	// Check if shunt value is compatible with pga-gain
>  	if (data->shunt_uohms > data->pga_gain * 40 * 1000 * 1000) {
> -		dev_err(dev, "shunt-resistor: %u too big for pga_gain: %u\n",
> -			data->shunt_uohms, data->pga_gain);
> -		return -EINVAL;
> +		return dev_err_probe(dev, -EINVAL,
> +				     "shunt-resistor: %u too big for pga_gain: %u\n",
> +				     data->shunt_uohms, data->pga_gain);
>  	}
>  
>  	return 0;
> @@ -721,22 +721,16 @@ static int tmp51x_probe(struct i2c_client *client)
>  	data->max_channels = (uintptr_t)i2c_get_match_data(client);
>  
>  	ret = tmp51x_configure(dev, data);
> -	if (ret < 0) {
> -		dev_err(dev, "error configuring the device: %d\n", ret);
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "error configuring the device\n");
>  
>  	data->regmap = devm_regmap_init_i2c(client, &tmp51x_regmap_config);
> -	if (IS_ERR(data->regmap)) {
> -		dev_err(dev, "failed to allocate register map\n");
> -		return PTR_ERR(data->regmap);
> -	}
> +	if (IS_ERR(data->regmap))
> +		return dev_err_probe(dev, PTR_ERR(data->regmap), "failed to allocate register map\n");

That line length was getting too long. Please consider running checkpatch
on your patches.

Guenter