Re: [PATCH 06/12] iio: adc: ad9467: add mutex to struct ad9467_state
From: Nuno Sá
Date: Fri Dec 01 2023 - 03:49:46 EST
On Thu, 2023-11-30 at 15:50 -0600, David Lechner wrote:
> On Tue, Nov 21, 2023 at 4:17 AM Nuno Sa via B4 Relay
> <devnull+nuno.sa.analog.com@xxxxxxxxxx> wrote:
> >
> > From: Nuno Sa <nuno.sa@xxxxxxxxxx>
> >
> > When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
> > are done which means we need to properly protect the whole operation so
> > we are sure we will be in a sane state if two concurrent calls occur.
> >
> > Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
> > Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> > ---
> > drivers/iio/adc/ad9467.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
> > index 04474dbfa631..91821dee03b7 100644
> > --- a/drivers/iio/adc/ad9467.c
> > +++ b/drivers/iio/adc/ad9467.c
> > @@ -4,7 +4,7 @@
> > *
> > * Copyright 2012-2020 Analog Devices Inc.
> > */
> > -
> > +#include <linux/cleanup.h>
> > #include <linux/module.h>
> > #include <linux/mutex.h>
>
> Ah, the case of the misplaced header from the previous patch is solved. :-)
>
Yeps, it needs to be in this patch :)
> > #include <linux/device.h>
> > @@ -122,6 +122,8 @@ struct ad9467_state {
> > unsigned int output_mode;
> >
> > struct gpio_desc *pwrdown_gpio;
> > + /* protect against concurrent accesses to the device */
> > + struct mutex lock;
> > };
> >
> > static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
> > @@ -162,6 +164,7 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv,
> > unsigned int reg,
> > int ret;
> >
> > if (!readval) {
> > + guard(mutex)(&st->lock);
> > ret = ad9467_spi_write(spi, reg, writeval);
> > if (ret)
> > return ret;
> > @@ -310,6 +313,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv,
> > int val, int val2)
> > if (scale_val[0] != val || scale_val[1] != val2)
> > continue;
> >
> > + guard(mutex)(&st->lock);
> > ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
> > info->scale_table[i][1]);
> > if (ret < 0)
> >
> > --
> > 2.42.1
> >
> >
>
> Alternately, this could probably be solved with spi_bus_lock/unlock
> and spi_sync_locked rather than introducing a new mutex.
Hmm, typically you just have your own lock. No reason to lock the spi bus. And I also
have some plans to eventually change this to regmap :)
- Nuno Sá