Re: [PATCH v11 0/20] Refactoring Microchip PCIe driver and add StarFive PCIe
From: Damian Tometzki
Date: Fri Dec 01 2023 - 10:32:21 EST
On Fri, 01. Dec 15:15, Minda Chen wrote:
>
>
> On 2023/11/29 19:32, Damian Tometzki wrote:
> > On Wed, 29. Nov 07:39, Damian Tometzki wrote:
> >> Hello Minda,
> >>
> >> i tried this Patchset on Linux-6.6.3 but boot with nvme doesnt work. Linux doesnt find
> >> /root partition /dev/nvme0n1p4.
> >> I dont know if it has anything to do with this patchset ?
> >> Best regards
> >> Damian
> > Hi,
> > some additional information:
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> > [ 11.097653] /soc/pcie@940000000: Failed to get clk index: 1 ret: -517
> > [ 11.104147] pcie-starfive 940000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.111981] /soc/pcie@9c0000000: Failed to get clk index: 1 ret: -517
> > [ 11.118451] pcie-starfive 9c0000000.pcie: error -ENODEV: failed to get pcie clocks
> > [ 11.126371] platform 17020000.pinctrl: deferred probe pending
> > [ 11.132145] platform 16010000.mmc: deferred probe pending
> > Begin: Running /scripts/local-block ... done.
> > Begin: Running /scripts/local-block ... done.
> >
> > Damian
> >
> It is get stg clk failed. Did you enable CONFIG_CLK_STARFIVE_JH7110_STG=y?
Hi,
it is now a little bit better now i get:
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[ 13.916056] platform 940000000.pcie: deferred probe pending
[ 13.921668] platform 9c0000000.pcie: deferred probe pending
[ 13.927259] platform 16010000.mmc: deferred probe pending
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Damian
> >>
> >> On Wed, 15. Nov 19:48, Minda Chen wrote:
> >> > This patchset final purpose is add PCIe driver for StarFive JH7110 SoC.
> >> > JH7110 using PLDA XpressRICH PCIe IP. Microchip PolarFire Using the
> >> > same IP and have commit their codes, which are mixed with PLDA
> >> > controller codes and Microchip platform codes.
> >> >
> >> > For re-use the PLDA controller codes, I request refactoring microchip
> >> > codes, move PLDA common codes to PLDA files.
> >> > Desigware and Cadence is good example for refactoring codes.
> >> >
> >> > ----------------------------------------------------------
> >> > The refactoring patches total number is 16,(patch 1-16)
> >> > which do NOT contain changing logic of codes.
> >> >
> >> > These patches just contain three type basic operations.
> >> > (rename, modify codes to support starfive platform, and moving to common file)
> >> > If these patched are all be reviewed. They can be accepted first.
> >> >
> >> > Refactoring patches can be devided to different groups
> >> > 1. (patch 1- 3 is the prepare work of refactoring)
> >> > patch1 is move PLDA XpressRICH PCIe host common properties dt-binding
> >> > docs from microchip,pcie-host.yaml
> >> > patch2 is move PolarFire codes to PLDA directory.
> >> > patch3 is move PLDA IP register macros to plda-pcie.h
> >> >
> >> > 2. (patch4 - 6 is processing and re-use PCIe host instance)
> >> > patch4 is add bridge_addr field to PCIe host instance.
> >> > patch5 is rename data structure in microchip codes.
> >> > patch6 is moving two data structures to head file
> >> >
> >> > 3. (patch 7 - 9 are for re-use two PCIe setup function)
> >> > patch7 is rename two setup functions in microchip codes, prepare to move
> >> > to common file.
> >> > patch8 is change the arguments of plda_pcie_setup_iomems()
> >> > patch9 is move the two setup functions to common file pcie-plda-host.c
> >> >
> >> > 4.(patch 10 - 16 are for re-use interupt processing codes)
> >> > patch10 is rename the IRQ related functions, prepare to move to
> >> > pcie-plda-host.c
> >> > patch 11 - 15 is modify the interrupt event codes, preparing for support starfive
> >> > and microchip two platforms.
> >> > patch16 is move IRQ related functions to pcie-plda-host.c
> >> >
> >> > ------------------------------------------------------------
> >> > The remainder patches (patch 17 -20) are not refactoring patch.
> >> > They are for adding StarFive codes and dont modify the microchip's
> >> > codes.
> >> >
> >> > patch17 is Add PLDA event interrupt codes and host init/deinit functions.
> >> > patch18 is add StarFive JH7110 PCIe dt-binding doc.
> >> > patch19 is add StarFive JH7110 Soc PCIe codes.
> >> > patch20 is Starfive dts config
> >> >
> >> > This patchset is base on v6.7-rc1
> >> >
> >> > previous version:
> >> > v6:https://patchwork.kernel.org/project/linux-pci/cover/20230915102243.59775-1-minda.chen@xxxxxxxxxxxxxxxx/
> >> > v7:https://patchwork.kernel.org/project/linux-pci/cover/20230927100802.46620-1-minda.chen@xxxxxxxxxxxxxxxx/
> >> > v8:https://patchwork.kernel.org/project/linux-pci/cover/20231011110514.107528-1-minda.chen@xxxxxxxxxxxxxxxx/
> >> > v9:https://patchwork.kernel.org/project/linux-pci/cover/20231020104341.63157-1-minda.chen@xxxxxxxxxxxxxxxx/
> >> > v10:https://patchwork.kernel.org/project/linux-pci/cover/20231031115430.113586-1-minda.chen@xxxxxxxxxxxxxxxx/
> >> >
> >> > change:
> >> > v11:
> >> > check and modify some commit messages again.
> >> > All the codes are the same with v10.
> >> >
> >> > v10:
> >> > All the commit message set to fit in 75 columns.
> >> > All the codes fit in less than 80 colunms.
> >> > patch 14:
> >> > Commit message changes suggested by Conor.
> >> > patch 19:
> >> > Add 100 ms delay macro to pci.h
> >> > generic phy pointer related codes moving to pcie-starfive.c
> >> > This patch Change pcie-starfive only, bus_ops move to patch 16.
> >> > Some Codes changes suggested by Bjorn.
> >> >
> >> > v9:
> >> > v8 patch 10 squash to v9 patch 12, v8 patch 18 squash to v9 patch 16.
> >> > patch 4 - 16: Add new review tags and add more accurate commit messages.
> >> > patch 17: move the plda_pcie_host_init/deinit from patch 19. Make
> >> > plda driver become to whole driver.
> >> >
> >> > v8:
> >> > The patch description in cover-letter has been changed.
> >> >
> >> > v7 patch 4 split to v8 patch 4 - 6.
> >> > (It is patches about re-use pcie host data structure, new patches just contain one
> >> > function modification. It is more reguluar and easier to review).
> >> >
> >> > patch 7- 9: modify the commit messages and add reason of
> >> > modifcation.
> >> > patch10- 16 :
> >> > Add review tag and add more commit messages to declear the
> >> > reason of modifying the codes.
> >> > patch17: plda_handle_events() using bit mask macro. The function are
> >> > easier to read.
> >> >
> >> > v7:
> >> > patch17: fix the build warning.
> >> > patch19: Some format changes (Emil's comment)
> >> > patch20: change the pcie node sequences by alphabetical
> >> > delete the "interupt-parent" in pcie node.
> >> >
> >> > v6:
> >> > v5 patch 4 split to patch 4 -9. New patches just contain one function modification. It is more reguluar.
> >> >
> >> > patch 9: Just move the two setup functions only
> >> > patch 19 : draw a graph of PLDA local register, make it easier to
> >> > review the codes.
> >> > v5 patch 7 split to patch 10- 16. Each patch just contain one
> >> > function modification. It is more regular.
> >> > patch 10: rename IRQ related functions.
> >> > patch 11 - 15 : modify the events codes, total five patch.
> >> > patch 16: move IRQ related functions to pcie-plda-host.c
> >> > patch 19- 20 using "linux,pci-domain" dts setting.
> >> >
> >> > Minda Chen (20):
> >> > dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
> >> > PCI: microchip: Move pcie-microchip-host.c to plda directory
> >> > PCI: microchip: Move PLDA IP register macros to pcie-plda.h
> >> > PCI: microchip: Add bridge_addr field to struct mc_pcie
> >> > PCI: microchip: Rename two PCIe data structures
> >> > PCI: microchip: Move PCIe host data structures to plda-pcie.h
> >> > PCI: microchip: Rename two setup functions
> >> > PCI: microchip: Change the argument of plda_pcie_setup_iomems()
> >> > PCI: microchip: Move setup functions to pcie-plda-host.c
> >> > PCI: microchip: Rename interrupt related functions
> >> > PCI: microchip: Add num_events field to struct plda_pcie_rp
> >> > PCI: microchip: Add request_event_irq() callback function
> >> > PCI: microchip: Add INTx and MSI event num to struct plda_event
> >> > PCI: microchip: Add get_events() callback function
> >> > PCI: microchip: Add event IRQ domain ops to struct plda_event
> >> > PCI: microchip: Move IRQ functions to pcie-plda-host.c
> >> > PCI: plda: Add event interrupt codes and host init/deinit functions
> >> > dt-bindings: PCI: Add StarFive JH7110 PCIe controller
> >> > PCI: starfive: Add JH7110 PCIe controller
> >> > riscv: dts: starfive: add PCIe dts configuration for JH7110
> >> >
> >> > .../bindings/pci/microchip,pcie-host.yaml | 55 +-
> >> > .../pci/plda,xpressrich3-axi-common.yaml | 75 ++
> >> > .../bindings/pci/starfive,jh7110-pcie.yaml | 120 ++++
> >> > MAINTAINERS | 19 +-
> >> > .../jh7110-starfive-visionfive-2.dtsi | 64 ++
> >> > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++
> >> > drivers/pci/controller/Kconfig | 9 +-
> >> > drivers/pci/controller/Makefile | 2 +-
> >> > drivers/pci/controller/plda/Kconfig | 29 +
> >> > drivers/pci/controller/plda/Makefile | 4 +
> >> > .../{ => plda}/pcie-microchip-host.c | 602 ++--------------
> >> > drivers/pci/controller/plda/pcie-plda-host.c | 657 ++++++++++++++++++
> >> > drivers/pci/controller/plda/pcie-plda.h | 266 +++++++
> >> > drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++
> >> > drivers/pci/pci.h | 7 +
> >> > 15 files changed, 1851 insertions(+), 604 deletions(-)
> >> > create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
> >> > create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> >> > create mode 100644 drivers/pci/controller/plda/Kconfig
> >> > create mode 100644 drivers/pci/controller/plda/Makefile
> >> > rename drivers/pci/controller/{ => plda}/pcie-microchip-host.c (54%)
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> >> > create mode 100644 drivers/pci/controller/plda/pcie-plda.h
> >> > create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
> >> >
> >> >
> >> > base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
> >> > --
> >> > 2.17.1
> >> >