[PATCH] ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node

[Mihai Sain]

On board the sdmmc0 interface is wired to a SD Card socket.
According with mmc-controller bindings, the mmc-ddr-3_3v property
is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
Remove the mmc-ddr-3_3v property from sdmmc0 node.

Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe34..15239834d886 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@ qspi1_flash: flash@0 {
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
-- 
2.43.0