Re: [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes

[claudiu beznea]

Hi, Geert,

On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
>>                         status = "disabled";
>>                 };
>>
>> +               eth0: ethernet@11c30000 {
>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
>> +                       reg = <0 0x11c30000 0 0x10000>;
>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "mux", "fil", "arp_ns";
>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
>> +                       clock-names = "axi", "chi", "refclk";
>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
>> +                       power-domains = <&cpg>;
> 
> Perhaps add a default phy mode, like on other SoCs?
> 
>     phy-mode = "rgmii"';

I skipped this (even it was available on the other SoCs) as I consider the
phy-mode is board specific.

> 
> Also missing:
> 
>     #address-cells = <1>;
>     #size-cells = <0>;

Same for these.

> 
>> +                       status = "disabled";
>> +               };
> 
> Same comments for eth1.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>