[PATCH v5 3/3] scsi: libsas: Fix the failure of adding phy with zero-address to port
From: Xingui Yang
Date: Mon Dec 04 2023 - 07:32:46 EST
When the expander device which attached many SATA disks is connected to
the host, first disable and then enable the local phy. The following BUG()
will be triggered with a small probability:
[562240.051046] sas: phy19 part of wide port with phy16
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
[562240.051203] sas: done REVALIDATING DOMAIN on port 0, pid:435909, res 0x0
<...>
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
[562240.085064] ------------[ cut here ]------------
[562240.096612] kernel BUG at drivers/scsi/scsi_transport_sas.c:1083!
[562240.109611] Internal error: Oops - BUG: 0 [#1] SMP
[562240.343518] Process kworker/u256:3 (pid: 435909, stack limit = 0x0000000003bcbebf)
[562240.421714] Workqueue: 0000:b4:02.0_disco_q sas_revalidate_domain [libsas]
[562240.437173] pstate: 40c00009 (nZcv daif +PAN +UAO)
[562240.450478] pc : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.465283] lr : sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.479751] sp : ffff0000300cfa70
[562240.674822] Call trace:
[562240.682709] sas_port_add_phy+0x13c/0x168 [scsi_transport_sas]
[562240.694013] sas_ex_get_linkrate.isra.5+0xcc/0x128 [libsas]
[562240.704957] sas_ex_discover_end_dev+0xfc/0x538 [libsas]
[562240.715508] sas_ex_discover_dev+0x3cc/0x4b8 [libsas]
[562240.725634] sas_ex_discover_devices+0x9c/0x1a8 [libsas]
[562240.735855] sas_ex_revalidate_domain+0x2f0/0x450 [libsas]
[562240.746123] sas_revalidate_domain+0x158/0x160 [libsas]
[562240.756014] process_one_work+0x1b4/0x448
[562240.764548] worker_thread+0x54/0x468
[562240.772562] kthread+0x134/0x138
[562240.779989] ret_from_fork+0x10/0x18
What causes this problem:
1. For phy19, when the phy is attached and added to the parent wide port,
the path is:
sas_rediscover()
->sas_discover_new()
->sas_ex_discover_devices()
->sas_ex_discover_dev()
-> sas_add_parent_port()
ex_phy->port was not set and when it is removed from parent wide port the
path is:
sas_rediscover()
->sas_unregister_devs_sas_addr()
Then the sas address of phy19 becomes 0, and since ex_phy->port is NULL,
phy19 was not removed from the parent wide port's phy_list.
2. For phy0, it is connected to a new sata device and the path is:
sas_rediscover()
->sas_discover_new()->sas_ex_phy_discover()
->sas_ex_phy_discover_helper()
->sas_set_ex_phy()
->sas_ex_discover_devices()
->sas_ex_discover_dev()
->sas_ex_discover_end_dev()
->sas_port_alloc() // Create port-7:7:0
->sas_ex_get_linkrate()
->sas_port_add_phy()
The type of the newly connected device is stp, but the linkrate is 5 which
less than 1.5G, then the sas address is set to 0 in sas_set_ex_phy().
Subsequently, a new port port-7:7:0 was created and tried to add phy19 with
the same zero-address to this new port. However, phy19 still belongs to
another port, then a BUG() was triggered in sas_ex_get_linkrate().
Fix the problem as follows:
1. Use sas_port_add_ex_phy() instead of sas_port_add_phy() when ex_phy is
added to the parent port.
2. Set ex_dev->parent_port to NULL when the number of phy on the port
becomes 0.
3. When phy->attached_dev_type != NO_DEVICE, do not set the zero address
for phy->attached_sas_addr.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx>
---
drivers/scsi/libsas/sas_expander.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 7aa968b85e1e..9152152d5e10 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -45,7 +45,7 @@ static void sas_add_parent_port(struct domain_device *dev, int phy_id)
BUG_ON(sas_port_add(ex->parent_port));
sas_port_mark_backlink(ex->parent_port);
}
- sas_port_add_phy(ex->parent_port, ex_phy->phy);
+ sas_port_add_ex_phy(ex->parent_port, ex_phy);
}
/* ---------- SMP task management ---------- */
@@ -261,8 +261,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
/* help some expanders that fail to zero sas_address in the 'no
* device' case
*/
- if (phy->attached_dev_type == SAS_PHY_UNUSED ||
- phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
+ if (phy->attached_dev_type == SAS_PHY_UNUSED)
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
else
memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
@@ -1864,9 +1863,12 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
if (phy->port) {
sas_port_delete_phy(phy->port, phy->phy);
sas_device_set_phy(found, phy->port);
- if (phy->port->num_phys == 0)
+ if (phy->port->num_phys == 0) {
list_add_tail(&phy->port->del_list,
&parent->port->sas_port_del_list);
+ if (ex_dev->parent_port == phy->port)
+ ex_dev->parent_port = NULL;
+ }
phy->port = NULL;
}
}
--
2.17.1