Re: [v3 3/6] drm/vs: Register DRM device

[Philipp Zabel]

Hi Keith,

On Mo, 2023-12-04 at 20:33 +0800, Keith Zhao wrote:
> Implement drm device registration interface
> 
> Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
> ---
[...]
> diff --git a/drivers/gpu/drm/verisilicon/Kconfig b/drivers/gpu/drm/verisilicon/Kconfig
> new file mode 100644
> index 000000000000..e10fa97635aa
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config DRM_VERISILICON
> +	tristate "DRM Support for VeriSilicon"
> +	depends on DRM
> +	select DRM_KMS_HELPER
> +	select DRM_GEM_DMA_HELPER
> +	select CMA
> +	select DMA_CMA
> +	help
> +	  Choose this option if you have a VeriSilicon soc chipset.

This seems a bit generic. Doesn't the VeriSilicon display controller IP
used on JH7110 have a product name?

[...]
> diff --git a/drivers/gpu/drm/verisilicon/vs_drv.c b/drivers/gpu/drm/verisilicon/vs_drv.c
> new file mode 100644
> index 000000000000..4fb1f29ef84b
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_drv.c
> @@ -0,0 +1,316 @@
> +// SPDX-License-Identifier: GPL-2.0
[...]
> +static void vs_drm_device_release_clocks(void *res)
> +{
> +	struct vs_drm_device *priv = res;
> +	unsigned int i;
> +
> +	reset_control_bulk_assert(priv->nrsts, priv->rst_vout);
> +
> +	for (i = 0; i < priv->clk_count; ++i) {
> +		if (priv->clks[i]) {
> +			clk_disable_unprepare(priv->clks[i]);
> +			clk_put(priv->clks[i]);
> +		}
> +	}

Why not use the bulk API for clk as well?

[...]
> +static int vs_drm_device_init_clocks(struct vs_drm_device *priv)
> +{
> +	struct drm_device *dev = &priv->base;
> +	struct platform_device *pdev = to_platform_device(dev->dev);
> +	struct device_node *of_node = pdev->dev.of_node;
> +	struct clk *clock;
> +	unsigned int i;
> +	int ret;
> +
> +	if (dev_get_platdata(&pdev->dev) || !of_node)
> +		return 0;
> +
> +	priv->nrsts = ARRAY_SIZE(priv->rst_vout);
> +	for (int i = 0; i < priv->nrsts; ++i)
> +		priv->rst_vout[i].id = vout_resets[i];
> +	ret = devm_reset_control_bulk_get_shared(dev->dev, priv->nrsts,
> +						 priv->rst_vout);

I would request resets and clocks in _probe().

If component_bind_all() returns -EPROBE_DEFER because of a still
missing DSI panel backlight or similar, this doesn't have to be done
multiple times.

> +	if (ret) {
> +		drm_err(dev, "Failed to get reset controls\n");
> +		return ret;
> +	}
> +
> +	priv->clk_count = of_clk_get_parent_count(of_node);
> +	if (!priv->clk_count)
> +		return 0;
> +
> +	priv->clks = drmm_kzalloc(dev, priv->clk_count * sizeof(priv->clks[0]),
> +				  GFP_KERNEL);
> +	if (!priv->clks)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < priv->clk_count; ++i) {
> +		clock = of_clk_get(of_node, i);
> +		if (IS_ERR(clock)) {
> +			ret = PTR_ERR(clock);
> +			if (ret == -EPROBE_DEFER)
> +				goto err;
> +			drm_err(dev, "clock %u not found: %d\n", i, ret);
> +			continue;
> +		}
> +		ret = clk_prepare_enable(clock);
> +		if (ret) {
> +			drm_err(dev, "failed to enable clock %u: %d\n",
> +				i, ret);
> +			clk_put(clock);
> +			continue;
> +		}
> +		priv->clks[i] = clock;
> +	}
> +
> +	ret = reset_control_bulk_deassert(priv->nrsts, priv->rst_vout);
> +	if (ret)
> +		return ret;

This should goto err, otherwise clocks are left enabled.

> +
> +	return devm_add_action_or_reset(&pdev->dev,
> +					vs_drm_device_release_clocks,
> +					priv);
> +
> +err:
> +	while (i) {
> +		--i;
> +		if (priv->clks[i]) {
> +			clk_disable_unprepare(priv->clks[i]);
> +			clk_put(priv->clks[i]);
> +		}
> +	}
> +	return ret;
> +}
> +
> +static int vs_drm_bind(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct vs_drm_device *priv;
> +	int ret;
> +	struct drm_device *drm_dev;
> +
> +	/* Remove existing drivers that may own the framebuffer memory. */
> +	ret = drm_aperture_remove_framebuffers(&vs_drm_driver);
> +	if (ret)
> +		return ret;
> +
> +	priv = devm_drm_dev_alloc(dev, &vs_drm_driver, struct vs_drm_device, base);
> +	if (IS_ERR(priv))
> +		return PTR_ERR(priv);
> +
> +	priv->pitch_alignment = 64;

Why is this a variable instead of a constant?

> +	ret = dma_set_coherent_mask(priv->base.dev, DMA_BIT_MASK(40));
> +	if (ret)
> +		return ret;
> +
> +	drm_dev = &priv->base;
> +	platform_set_drvdata(pdev, drm_dev);
> +
> +	ret = vs_drm_device_init_clocks(priv);
> +	if (ret)
> +		return ret;
> +
> +	vs_mode_config_init(drm_dev);
> +
> +	/* Now try and bind all our sub-components */
> +	ret = component_bind_all(dev, drm_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = drm_vblank_init(drm_dev, drm_dev->mode_config.num_crtc);
> +	if (ret)
> +		return ret;

Missing component_unbind_all(), see below.

> +
> +	drm_mode_config_reset(drm_dev);
> +
> +	drm_kms_helper_poll_init(drm_dev);
> +
> +	ret = drm_dev_register(drm_dev, 0);
> +	if (ret)
> +		return ret;

Missing drm_kms_helper_poll_fini(), see below.

> +
> +	drm_fbdev_generic_setup(drm_dev, 32);
> +
> +	return 0;

Here I'd expect an error path calling drm_kms_helper_poll_fini() and
component_unbind_all() as appropriate.


regards
Philipp