Re: [PATCH 2/3] arm64: dts: qcom: qrb5165-rb5: add a pin function for BT enable GPIO

[Johan Hovold]

On Tue, Dec 05, 2023 at 12:23:10PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Set up the pin function for the Bluetooth enable GPIO.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index ce6ae0771d34..ead0c45ba60c 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1264,6 +1264,17 @@ &tlmm {
>  		"HST_WLAN_UART_TX",
>  		"HST_WLAN_UART_RX";
>  
> +	bt_en_state: bt-default-state {
> +		bt-en {
> +			pins = "gpio21";
> +			function = "gpio";
> +
> +			drive-strength = <16>;
> +			output-low;
> +			bias-pull-up;
> +		};
> +	};
> +
>  	lt9611_irq_pin: lt9611-irq-state {
>  		pins = "gpio63";
>  		function = "gpio";

This makes no sense as a separate patch and should be squashed with the
final patch enabling bluetooth. Same for the first patch.

Johan