Re: [PATCH v1] ASoC: codecs: wcd937x: Add wcd937x codec driver

[Krzysztof Kozlowski]

On 05/12/2023 13:34, Prasad Kumpatla wrote:
> Add wcd937x codec and wcd937x-sdw soundwire drivers.
> 
> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
> ---
>  sound/soc/codecs/Kconfig       |   20 +
>  sound/soc/codecs/Makefile      |    7 +
>  sound/soc/codecs/wcd937x-sdw.c | 1147 ++++++++++++
>  sound/soc/codecs/wcd937x.c     | 3047 ++++++++++++++++++++++++++++++++
>  sound/soc/codecs/wcd937x.h     |  654 +++++++


Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.

The warning about undocumented ABI is important. You cannot just ignore it.

>  5 files changed, 4875 insertions(+)
>  create mode 100644 sound/soc/codecs/wcd937x-sdw.c
>  create mode 100644 sound/soc/codecs/wcd937x.c
>  create mode 100644 sound/soc/codecs/wcd937x.h
> 
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 3429419ca694..b89118e8c391 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -275,6 +275,7 @@ config SND_SOC_ALL_CODECS
>  	imply SND_SOC_UDA1380
>  	imply SND_SOC_WCD9335
>  	imply SND_SOC_WCD934X
> +	imply SND_SOC_WCD937X_SDW
>  	imply SND_SOC_WCD938X_SDW
>  	imply SND_SOC_LPASS_MACRO_COMMON
>  	imply SND_SOC_LPASS_RX_MACRO
> @@ -2038,6 +2039,25 @@ config SND_SOC_WCD934X
>  	  The WCD9340/9341 is a audio codec IC Integrated in
>  	  Qualcomm SoCs like SDM845.
>  
> +config SND_SOC_WCD937X
> +	depends on SND_SOC_WCD937X_SDW
> +	tristate
> +	depends on SOUNDWIRE || !SOUNDWIRE
> +	select SND_SOC_WCD_CLASSH
> +
> +config SND_SOC_WCD937X_SDW

That's one big patch. How about splitting the patch per driver for
easier review?

> +	tristate "WCD9370/WCD9375 Codec - SDW"
> +	select SND_SOC_WCD937X
> +	select SND_SOC_WCD_MBHC
> +	select REGMAP_IRQ
> +	depends on SOUNDWIRE
> +	select REGMAP_SOUNDWIRE
> +	help
> +	  The WCD9370/9375 is an audio codec IC used with SoCs
> +	  like SC7280 or QCM6490 chipsets, and it connected
> +	  via soundwire.
> +	  To compile this codec driver say Y or m.

...


> +
> +static int wcd937x_probe(struct platform_device *pdev)
> +{
> +	struct component_match *match = NULL;
> +	struct device *dev = &pdev->dev;
> +	struct wcd937x_priv *wcd937x;
> +	struct wcd_mbhc_config *cfg;
> +	int ret;
> +
> +	wcd937x = devm_kzalloc(dev, sizeof(*wcd937x), GFP_KERNEL);
> +	if (!wcd937x)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, wcd937x);
> +	mutex_init(&wcd937x->micb_lock);
> +
> +	wcd937x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);

Why not devm API?

> +	if (wcd937x->reset_gpio < 0)
> +		return dev_err_probe(dev, wcd937x->reset_gpio,
> +				     "Failed to get reset gpio\n");
> +
> +	wcd937x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro", GPIOD_OUT_LOW);
> +	if (IS_ERR(wcd937x->us_euro_gpio))
> +		return dev_err_probe(dev, PTR_ERR(wcd937x->us_euro_gpio),
> +				"us-euro swap Control GPIO not found\n");
> +
> +	cfg = &wcd937x->mbhc_cfg;
> +	cfg->swap_gnd_mic = wcd937x_swap_gnd_mic;
> +
> +	wcd937x->supplies[0].supply = "vdd-rxtx";
> +	wcd937x->supplies[1].supply = "vdd-px";
> +	wcd937x->supplies[2].supply = "vdd-mic-bias";
> +
> +	ret = devm_regulator_bulk_get(dev, WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get supplies\n");
> +
> +	ret = regulator_bulk_enable(WCD937X_MAX_BULK_SUPPLY, wcd937x->supplies);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to enable supplies\n");
> +
> +	/* Get the buck separately, as it needs special handling */
> +	wcd937x->buck_supply = devm_regulator_get(dev, "vdd-buck");
> +	if (IS_ERR(wcd937x->buck_supply))
> +		return dev_err_probe(dev, PTR_ERR(wcd937x->buck_supply),
> +				     "Failed to get buck supply\n");
> +
> +	ret = regulator_enable(wcd937x->buck_supply);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to enable buck supply\n");
> +
> +	wcd937x_dt_parse_micbias_info(dev, wcd937x);
> +
> +	cfg->mbhc_micbias = MIC_BIAS_2;
> +	cfg->anc_micbias = MIC_BIAS_2;
> +	cfg->v_hs_max = WCD_MBHC_HS_V_MAX;
> +	cfg->num_btn = WCD937X_MBHC_MAX_BUTTONS;
> +	cfg->micb_mv = wcd937x->micb2_mv;
> +	cfg->linein_th = 5000;
> +	cfg->hs_thr = 1700;
> +	cfg->hph_thr = 50;
> +
> +	wcd_dt_parse_mbhc_data(dev, &wcd937x->mbhc_cfg);
> +
> +	ret = wcd937x_add_slave_components(wcd937x, dev, &match);
> +	if (ret)
> +		return ret;
> +
> +	wcd937x_reset(wcd937x);
> +
> +	ret = component_master_add_with_match(dev, &wcd937x_comp_ops, match);
> +	if (ret)
> +		return ret;
> +
> +	pm_runtime_set_autosuspend_delay(dev, 1000);
> +	pm_runtime_use_autosuspend(dev);
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +	pm_runtime_idle(dev);
> +
> +	return ret;
> +}
> +
> +static void wcd937x_remove(struct platform_device *pdev)
> +{
> +	component_master_del(&pdev->dev, &wcd937x_comp_ops);
> +	dev_set_drvdata(&pdev->dev, NULL);
> +}
> +
> +static struct platform_driver wcd937x_codec_driver = {
> +	.probe = wcd937x_probe,
> +	.remove_new = wcd937x_remove,
> +	.driver = {
> +		.name = "wcd937x_codec",
> +		.of_match_table = of_match_ptr(wcd937x_of_match),

Drop of_match_ptr. You have warnings in your code.

> +		.suppress_bind_attrs = true,

Why?

> +	},
> +};


...

> +
> +#if IS_ENABLED(CONFIG_SND_SOC_WCD937X_SDW)
> +int wcd937x_sdw_free(struct wcd937x_sdw_priv *wcd,
> +		     struct snd_pcm_substream *substream,
> +		     struct snd_soc_dai *dai);

I don't think this driver makes sense on its own, without the SDW part.
Why not using dependency in Kconfig?

Best regards,
Krzysztof