Re: [PATCH 2/2] ALSA: hda/tas2563: Add tas2563 HDA driver

[Pierre-Louis Bossart]

>>> +
>>> +static void tas2563_fixup_i2c(struct hda_codec *cdc,
>>> +	const struct hda_fixup *fix, int action)
>>> +{
>>> +	 tas2xxx_generic_fixup(cdc, action, "i2c", "INT8866");
>>
>> Any specific reason to use an Intel ACPI identifier? Why not use
>> "TIAS2563" ?
>>
> INT8866 is in the ACPI.
> I don't know why Lenovo uses this name.
> I think it's more internal than intel.
> 
>    Scope (_SB.I2CD)
>     {
>         Device (TAS)
>         {
>             Name (_HID, "INT8866")  // _HID: Hardware ID

Ouch, I hope they checked with Intel that this isn't an HID already in
use...

>             Name (_UID, Zero)  // _UID: Unique ID
>             Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource
> Settings
>             {
>                 Name (RBUF, ResourceTemplate ()
>                 {
>                     I2cSerialBusV2 (0x004C, ControllerInitiated,
> 0x00061A80,
>                         AddressingMode7Bit, "\\_SB.I2CD",
>                         0x00, ResourceConsumer, , Exclusive,
>                         )
>                     I2cSerialBusV2 (0x004D, ControllerInitiated,
> 0x00061A80,
>                         AddressingMode7Bit, "\\_SB.I2CD",
>                         0x00, ResourceConsumer, , Exclusive,
>                         )
>                     GpioInt (Edge, ActiveLow, SharedAndWake, PullNone,
> 0x0000,
>                         "\\_SB.GPIO", 0x00, ResourceConsumer, ,
>                         )
>                         {   // Pin list
>                             0x0020
>                         }
>                 })
>                 Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
>             }
> 
>             Method (_STA, 0, NotSerialized)  // _STA: Status
>             {
>                 Return (0x0F)
>             }
>         }
>     }

>>> +static int tas2563_system_resume(struct device *dev)
>>> +{
>>> +	int ret;
>>> +	struct tas2563_data *tas2563 = dev_get_drvdata(dev);
>>> +
>>> +	dev_dbg(tas2563->dev, "System Resume\n");
>>> +
>>> +	ret = pm_runtime_force_resume(dev);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	for (int i = 0; i < tas2563->ndev; ++i)
>>> +		tas2563_tasdev_setup(tas2563, &tas2563->tasdevs[i]);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static const struct dev_pm_ops tas2563_hda_pm_ops = {
>>> +	SYSTEM_SLEEP_PM_OPS(tas2563_system_suspend, tas2563_system_resume)
>>
>> where's the pm_runtime stuff?
>>
> 
> The amp stores its state in software shutdown mode.
> The tas2563_hda_playback_hook wakes/shutdowns the amp, not the
> pm_runtime.

My point was that you have all these pm_runtime_ calls in the code, but
nothing that provides pm_runtime suspend-resume functions so not sure
what exactly the result is?