Re: [PATCH v2 0/2] misc: mei: Add support for IVSC device

[Hao Yao]

Wentong,

On mainline v6.6, I cherry-picked IVSC/LCJA related patches and these v2 
patches, added Intel IPU6 driver on Github, then made some changes on 
IPU6 HAL to auto link IVSC device. I tested the build on a Dell Latitude 
7440 which is using HI556 camera sensor and it previews normally.

If it's properly, you can add my "Tested-by:" tag.

Tested-by: Hao Yao <hao.yao@xxxxxxxxx>

On 2023/12/4 08:55, Wentong Wu wrote:
> The Intel visual sensing controller (IVSC) device is designed to
> control the camera sharing between host IPU for media usage and
> IVSC for context sensing (face detection).
>
> IVSC is exposed to host as a SPI device and the protocol used
> for communicating with host is MEI. This driver implements the
> transport protocol and MEI hardware interfaces for IVSC device.
>
> The firmware downloading for IVSC device is implemented as well.
>
> ---
> v2:
>    - change to `depends on INTEL_MEI_VSC_HW` for INTEL_MEI_VSC Kconfig
>    - remove MODULE_ALIAS and add MODULE_DEVICE_TABLE in platform-vsc.c
>
> Wentong Wu (2):
>    mei: Add transport driver for IVSC device
>    mei: Add MEI hardware support for IVSC device
>
>   drivers/misc/mei/Kconfig         |  24 ++
>   drivers/misc/mei/Makefile        |   7 +
>   drivers/misc/mei/platform-vsc.c  | 450 +++++++++++++++++++++
>   drivers/misc/mei/vsc-fw-loader.c | 822 +++++++++++++++++++++++++++++++++++++++
>   drivers/misc/mei/vsc-tp.c        | 555 ++++++++++++++++++++++++++
>   drivers/misc/mei/vsc-tp.h        |  50 +++
>   6 files changed, 1908 insertions(+)
>   create mode 100644 drivers/misc/mei/platform-vsc.c
>   create mode 100644 drivers/misc/mei/vsc-fw-loader.c
>   create mode 100644 drivers/misc/mei/vsc-tp.c
>   create mode 100644 drivers/misc/mei/vsc-tp.h