Re: [PATCH 3/7] dt-bindings: i2c: document st,stm32mp25-i2c compatible

[Rob Herring]

On Wed, Nov 29, 2023 at 01:59:12PM +0100, Alain Volmat wrote:
> Add a new compatible st,stm32mp25-i2c for the STM32MP25 series which
> has only one interrupt line for both events and errors and differs in
> term of handling of FastModePlus.
> 
> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 49 +++++++++++++++----
>  1 file changed, 39 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> index 94b75d9f66cd..6a69bb6de23e 100644
> --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> @@ -19,6 +19,7 @@ allOf:
>                - st,stm32f7-i2c
>                - st,stm32mp13-i2c
>                - st,stm32mp15-i2c
> +              - st,stm32mp25-i2c
>      then:
>        properties:
>          i2c-scl-rising-time-ns:
> @@ -41,6 +42,43 @@ allOf:
>          clock-frequency:
>            enum: [100000, 400000]
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32f4-i2c
> +              - st,stm32f7-i2c
> +              - st,stm32mp13-i2c
> +              - st,stm32mp15-i2c
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: interrupt ID for I2C event
> +            - description: interrupt ID for I2C error
> +
> +        interrupt-names:
> +          items:
> +            - const: event
> +            - const: error
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32mp25-i2c
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: common interrupt for events and errors
> +
> +        interrupt-names:
> +          items:
> +            - const: event
> +
>  properties:
>    compatible:
>      enum:
> @@ -48,20 +86,11 @@ properties:
>        - st,stm32f7-i2c
>        - st,stm32mp13-i2c
>        - st,stm32mp15-i2c
> +      - st,stm32mp25-i2c
>  
>    reg:
>      maxItems: 1
>  
> -  interrupts:
> -    items:
> -      - description: interrupt ID for I2C event
> -      - description: interrupt ID for I2C error
> -
> -  interrupt-names:
> -    items:
> -      - const: event
> -      - const: error

No this should remain. You are duplicating defining the names otherwise. 
Add 'minItems: 1' here. Then the if/then schemas should just have 
'maxItems: 1' or 'minItems: 2'.

Rob