Re: [PATCH V2 1/3] ufs: core: Add CPU latency QoS support for ufs driver

[Manivannan Sadhasivam]

On Mon, Dec 04, 2023 at 08:00:59PM +0530, Maramaina Naresh wrote:
> Register ufs driver to CPU latency PM QoS framework can improves
> ufs device random io performance.
> 
> PM QoS initialization will insert new QoS request into the CPU
> latency QoS list with the maximum latency PM_QOS_DEFAULT_VALUE
> value.
> 
> UFS driver will vote for performance mode on scale up and power
> save mode for scale down.
> 
> If clock scaling feature is not enabled then voting will be based
> on clock on or off condition.
> 
> tiotest benchmark tool io performance results on sm8550 platform:
> 
> 1. Without PM QoS support
> 	Type (Speed in)    | Average of 18 iterations
> 	Random Write(IPOS) | 41065.13
> 	Random Read(IPOS)  | 37101.3
> 
> 2. With PM QoS support
> 	Type (Speed in)    | Average of 18 iterations
> 	Random Write(IPOS) | 46784.9
> 	Random Read(IPOS)  | 42943.4
> (Improvement % with PM QoS = ~15%).
> 
> Co-developed-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@xxxxxxxxxxx>
> Signed-off-by: Maramaina Naresh <quic_mnaresh@xxxxxxxxxxx>
> ---
>  drivers/ufs/core/ufshcd-priv.h |  8 +++++
>  drivers/ufs/core/ufshcd.c      | 62 ++++++++++++++++++++++++++++++++++
>  include/ufs/ufshcd.h           | 16 +++++++++
>  3 files changed, 86 insertions(+)
> 
> diff --git a/drivers/ufs/core/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
> index f42d99ce5bf1..536805f6c4e1 100644
> --- a/drivers/ufs/core/ufshcd-priv.h
> +++ b/drivers/ufs/core/ufshcd-priv.h
> @@ -241,6 +241,14 @@ static inline void ufshcd_vops_config_scaling_param(struct ufs_hba *hba,
>  		hba->vops->config_scaling_param(hba, p, data);
>  }
>  
> +static inline u32 ufshcd_vops_config_qos_vote(struct ufs_hba *hba)
> +{
> +	if (hba->vops && hba->vops->config_qos_vote)
> +		return hba->vops->config_qos_vote(hba);

Please remove this callback as Bart noted.

> +
> +	return UFSHCD_QOS_DEFAULT_VOTE;
> +}
> +
>  static inline void ufshcd_vops_reinit_notify(struct ufs_hba *hba)
>  {
>  	if (hba->vops && hba->vops->reinit_notify)
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index ae9936fc6ffb..13370febd2b5 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -1001,6 +1001,20 @@ static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
>  	return ufshcd_get_local_unipro_ver(hba) < UFS_UNIPRO_VER_1_6;
>  }
>  
> +/**
> + * ufshcd_pm_qos_perf - vote for PM QoS performance or power save mode

ufshcd_pm_qos_update() - Update PM QoS request

> + * @hba: per adapter instance
> + * @on: If True, vote for perf PM QoS mode otherwise power save mode
> + */
> +static void ufshcd_pm_qos_perf(struct ufs_hba *hba, bool on)
> +{
> +	if (!hba->pm_qos_init)
> +		return;
> +
> +	cpu_latency_qos_update_request(&hba->pm_qos_req, on ? hba->qos_vote
> +							: PM_QOS_DEFAULT_VALUE);
> +}
> +
>  /**
>   * ufshcd_set_clk_freq - set UFS controller clock frequencies
>   * @hba: per adapter instance
> @@ -1153,6 +1167,10 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, unsigned long freq,
>  	trace_ufshcd_profile_clk_scaling(dev_name(hba->dev),
>  			(scale_up ? "up" : "down"),
>  			ktime_to_us(ktime_sub(ktime_get(), start)), ret);
> +
> +	if (!ret)
> +		ufshcd_pm_qos_perf(hba, scale_up);

Can't you just move this before trace_ufshcd_profile_clk_scaling()? This also
avoids checking for !ret.

> +
>  	return ret;
>  }
>  
> @@ -9204,6 +9222,8 @@ static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
>  	if (ret)
>  		return ret;
>  
> +	if (!ufshcd_is_clkscaling_supported(hba))
> +		ufshcd_pm_qos_perf(hba, on);
>  out:
>  	if (ret) {
>  		list_for_each_entry(clki, head, list) {
> @@ -9296,6 +9316,45 @@ static int ufshcd_init_clocks(struct ufs_hba *hba)
>  	return ret;
>  }
>  
> +/**
> + * ufshcd_pm_qos_init - initialize PM QoS instance

"Initialize PM QoS request"

> + * @hba: per adapter instance
> + */
> +static void ufshcd_pm_qos_init(struct ufs_hba *hba)
> +{
> +	if (!(hba->caps & UFSHCD_CAP_PM_QOS))
> +		return;
> +
> +	/*
> +	 * called to configure PM QoS vote value for UFS host,
> +	 * expecting qos vote return value from caller else
> +	 * default vote value will be return.
> +	 */
> +	hba->qos_vote = ufshcd_vops_config_qos_vote(hba);

No need of this variable too if you get rid of the callback.

> +	cpu_latency_qos_add_request(&hba->pm_qos_req,
> +					PM_QOS_DEFAULT_VALUE);
> +
> +	if (cpu_latency_qos_request_active(&hba->pm_qos_req))
> +		hba->pm_qos_init = true;

Why do you need this flag?

> +
> +	dev_dbg(hba->dev, "%s: QoS %s, qos_vote: %u\n", __func__,
> +		hba->pm_qos_init ? "initialized" : "uninitialized",
> +		hba->qos_vote);
> +}
> +
> +/**
> + * ufshcd_pm_qos_exit - remove instance from PM QoS
> + * @hba: per adapter instance
> + */
> +static void ufshcd_pm_qos_exit(struct ufs_hba *hba)
> +{
> +	if (!hba->pm_qos_init)
> +		return;
> +
> +	cpu_latency_qos_remove_request(&hba->pm_qos_req);
> +	hba->pm_qos_init = false;
> +}
> +

[...]

>  /**
>   * struct ufs_hba - per adapter private structure
>   * @mmio_base: UFSHCI base register address
> @@ -912,6 +923,8 @@ enum ufshcd_mcq_opr {
>   * @mcq_base: Multi circular queue registers base address
>   * @uhq: array of supported hardware queues
>   * @dev_cmd_queue: Queue for issuing device management commands
> + * @pm_qos_req: PM QoS request handle
> + * @pm_qos_init: flag to check if pm qos init completed
>   */
>  struct ufs_hba {
>  	void __iomem *mmio_base;
> @@ -1076,6 +1089,9 @@ struct ufs_hba {
>  	struct ufs_hw_queue *uhq;
>  	struct ufs_hw_queue *dev_cmd_queue;
>  	struct ufshcd_mcq_opr_info_t mcq_opr[OPR_MAX];
> +	struct pm_qos_request pm_qos_req;
> +	bool pm_qos_init;
> +	u32 qos_vote;

Order doesn't match Kdoc.

- Mani

-- 
மணிவண்ணன் சதாசிவம்