Re: [PATCH RESEND v10 0/3] Support pwm/tach driver for aspeed ast26xx

[Uwe Kleine-König]

On Tue, Nov 07, 2023 at 11:02:43AM -0800, Guenter Roeck wrote:
> On 11/7/23 02:50, Billy Tsai wrote:
> > Unlike the old design that the register setting of the TACH should based
> > on the configure of the PWM. In ast26xx, the dependency between pwm and
> > tach controller is eliminated and becomes a separate hardware block. One
> > is used to provide pwm output and another is used to monitor the frequency
> > of the input. This driver implements them by exposing two kernel
> > subsystems: PWM and HWMON. The PWM subsystem can be utilized alongside
> > existing drivers for controlling elements such as fans (pwm-fan.c),
> > beepers (pwm-beeper.c) and so on. Through the HWMON subsystem, the driver
> > provides sysfs interfaces for fan.
> > 
> > Changes since v9:
> > Change the type of fan-driving-mode to string
> > Fix some typos and formatting issues.
> > 
> 
> What is the resend about ?

And to the original v10 there is a reply by Krzysztof;
see https://lore.kernel.org/linux-pwm/3d9e50db-19f0-43b3-8042-2f80a1e7b79e@xxxxxxxxxx/ .

I'll mark the original and this resend as "changes-requested" in our
patchwork. Probably the most cooperative way to object is to send a v11
and point out the changes compared to v10.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Attachment: signature.asc
Description: PGP signature