Re: [BUG] wireless: mt7601u: probe failed with error -110

[cristian_ci]

[RESEND I've made a mistake with list of recipients]

Update:

I've built and installed mt7601Usta vendor driver, which is shown into lsmod output.

ra0 interface appears as shown in the following output from iwconfig and ifconfig:

ra0       Ralink STA  ESSID:""
          Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated
          Bit Rate:1 Mb/s
          RTS thr:off   Fragment thr:off
          Link Quality=10/100  Signal level:0 dBm  Noise level:0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


ra0       Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisioni:0 txqueuelen:1000
          Byte RX:0 (0.0 B)  Byte TX:0 (0.0 B)

The driver is properly loaded and the device doesn't connect/disconnect continuously as instead happens in mainline driver:

Bus 001 Device 007: ID 148f:7601 Ralink Technology, Corp.
    |__ Port 3: Dev 7, If 0, Class=vend., Driver=rt2870, 480M

Any thoughts?

Waiting for a reply,

Cristian.