Re: [PATCH v6 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

From: Krzysztof Kozlowski
Date: Thu Dec 07 2023 - 03:31:01 EST


On 06/12/2023 18:14, Anand Moon wrote:
> Hi Rob,
>
> On Wed, 6 Dec 2023 at 19:23, Rob Herring <robh@xxxxxxxxxx> wrote:
>>
>> On Mon, Dec 04, 2023 at 08:14:25PM +0530, Anand Moon wrote:
>>> Add the binding example for the USB3.1 Genesys Logic GL3523
>>> integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
>>> hub.
>>>
>>> For onboard hub controllers that support USB 3.x and USB 2.0 hubs
>>> with shared resets and power supplies, this property is used to identify
>>> the hubs with which these are shared.
>>>
>>> GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
>>> power to the USB HUB, it uses 5V power regulator.
>>>
>>> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>>> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
>>> ---
>>> V6: fix the description of the regulators
>>> Updated the commit message for regulator updates.
>>> add reviewed by Conor Dooley
>>> [1] https://lore.kernel.org/all/20231130053130.21966-2-linux.amoon@xxxxxxxxx/
>>> v5: upgrade peer-hub description : Conor Dooley
>>> [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
>>> v4: Fix the description of peer-hub and update the commit message.
>>> Schematics of the Odroid N2+
>>> https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
>>> V3: fix the dt_binding_check error, added new example for Genesys GL3523
>>> v2: added Genesys GL3523 binding
>>> v1: none
>>> ---
>>> .../bindings/usb/genesys,gl850g.yaml | 65 +++++++++++++++++--
>>> 1 file changed, 61 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>> index ee08b9c3721f..c6f63a69396d 100644
>>> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
>>> @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
>>> maintainers:
>>> - Icenowy Zheng <uwu@xxxxxxxxxx>
>>>
>>> -allOf:
>>> - - $ref: usb-device.yaml#
>>> -
>>> properties:
>>> compatible:
>>> enum:
>>> @@ -27,12 +24,46 @@ properties:
>>>
>>> vdd-supply:
>>> description:
>>> - the regulator that provides 3.3V core power to the hub.
>>> + The regulator that provides 3.3V or 5.0V core power to the hub.
>>> +
>>> + peer-hub:
>>> + $ref: /schemas/types.yaml#/definitions/phandle
>>> + description:
>>> + For onboard hub controllers that support USB 3.x and USB 2.0 hubs
>>> + with shared resets and power supplies, this property is used to identify
>>> + the hubs with which these are shared.
>>>
>>> required:
>>> - compatible
>>> - reg
>>>
>>> +allOf:
>>> + - $ref: usb-device.yaml#
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + enum:
>>> + - usb5e3,608
>>> + then:
>>> + properties:
>>> + peer-hub: false
>>> + vdd-supply: false
>>> + reset-gpios: true
>>> +
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + enum:
>>> + - usb5e3,610
>>> + - usb5e3,620
>>> + then:
>>> + properties:
>>> + peer-hub: true
>>> + vdd-supply: true
>>> + reset-gpios: true
>>
>> No need for this if schema. The default is they are allowed.
>>
>
> If I move reset-gpios to required, I observe the below warning.
>
> DTC_CHK Documentation/devicetree/bindings/usb/maxim,max33359.example.dtb
> /home/alarm/linux-amlogic-5.y-devel/Documentation/devicetree/bindings/usb/usb-device.example.dtb:
> hub@1: 'reset-gpio' is a required property
> from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#

Where are the properties defined? If you open the binding you see:
nowhere. You cannot define properties in some variant with "true".
Please define all of them in top-level and only narrow/constrain when
applicable.


Best regards,
Krzysztof