RE: [PATCH 1/2] dt-bindings: phy: realtek: Add Realtek DHC RTD SoC PCIe PHY

[TY_Chang[張子逸]]

Hi Krzysztof,

Thank you for the review.

>On 01/12/2023 11:52, Tzuyi Chang wrote:
>> +  "#phy-cells":
>> +    const: 0
>> +
>> +  nvmem-cells:
>> +    maxItems: 1
>> +    description:
>> +      Phandle to nvmem cell that contains 'Tx swing trim'
>> +      tuning parameter value for PCIe phy.
>> +
>> +  nvmem-cell-names:
>> +    items:
>> +      - const: tx_swing_trim
>> +
>> +  realtek,pcie-syscon:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description: phandle of syscon used to control PCIe MDIO register.
>
>Why this does not have reg property but syscon? This looks hacky.
>

Our PCIe PHY driver needs to access two registers:
1. PCIe MDIO register: Utilized for configuring the PCIe PHY.
2. PCIe MAC Link Control and Link Status Register: Use to get the current
  link speed for calibration purposes.

Both these registers reside within the PCIe controller registers. The PCIe
driver has mapped these register address region, so I use regmap to access
these registers.

>Where is the DTS of your platform so we can verify the bindings? In the past
>Realtek bindings and DTS were sent without testing.

The bindings and DTS for our platform are continuously being adjusted for the upstream.

Therefore, I only modified and tested the DTS node of the binding documentations I submitted.
The DTS node is the same as the examples in the binding documentation. I tested it using the
command "make dtbs_check DT_SCHEMA_FILES=..." without encountering any errors.

>> +
>> +required:
>> +  - compatible
>> +  - realtek,pcie-syscon
>> +  - "#phy-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    pcie1_phy {
>
>phy {
>

I will fix it in the next version.

Thanks,
Tzuyi Chang