Re: [PATCH v2 0/2] media: i2c: Add support for GC08A3 sensor

From: Laurent Pinchart
Date: Thu Dec 07 2023 - 06:45:13 EST


Hi Zhi Mao,

I have reviewed your v1 before noticing the v2, sorry about that. Most
of the comments I made on v1 are still applicable, so I'll skip v2 and
review v3.

On Thu, Dec 07, 2023 at 01:20:14PM +0800, Zhi Mao wrote:
> This series adds YAML DT binding and V4L2 sub-device driver for Galaxycore's
> GC08A3 8-megapixel 10-bit RAW CMOS 1/4" sensor, with an MIPI CSI-2 image data
> interface and the I2C control bus.
>
> The driver is implemented with V4L2 framework.
> - Async registered as a V4L2 sub-device.
> - As the first component of camera system including Seninf, ISP pipeline.
> - A media entity that provides one source pad in common.
> - Used in camera features on ChromeOS application.
>
> Also this driver supports following features:
> - manual exposure and analog gain control support
> - vertical blanking control support
> - test pattern support
> - media controller support
> - runtime PM support
> - support resolution: 3264x2448@30fps, 1920x1080@60fps
>
> Previous versions of this patch-set can be found here:
> v1: https://lore.kernel.org/linux-media/20231123115104.32094-1-zhi.mao@xxxxxxxxxxxx/
>
> Changes of v2 mainly address comments from Krzysztof/Rob Herring&Conor Dooley.
> Compared to v1:
> - Fix some review comments
> - Add reviewed-by for sensor driver
> - Fix some build-error and warning message
>
> Thanks
>
>
> Zhi Mao (2):
> media: i2c: Add GC08A3 image sensor driver
> media: dt-bindings: media: i2c: Document GC08A3 bindings
>
> .../bindings/media/i2c/galaxycore,gc08a3.yaml | 127 ++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> drivers/media/i2c/Kconfig | 14 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/gc08a3.c | 1888 +++++++++++++++++
> 5 files changed, 2032 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
> create mode 100644 drivers/media/i2c/gc08a3.c

--
Regards,

Laurent Pinchart