Re: [PATCH] drm/panel: re-alphabetize the menu list

[Randy Dunlap]

On 12/7/23 01:52, Aradhya Bhatia wrote:
> Hi Randy,
> 
> Thanks for the patch!
> 
> On 07/12/23 11:52, Randy Dunlap wrote:
>> A few of the DRM_PANEL entries have become out of alphabetical order,
>> so move them around a bit to restore alpha order.
>>
>> Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
>> Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
>> Cc: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
>> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
>> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
>> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
>> Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
>> Cc: David Airlie <airlied@xxxxxxxxx>
>> Cc: Daniel Vetter <daniel@xxxxxxxx>
>> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> ---
>>  drivers/gpu/drm/panel/Kconfig |   90 ++++++++++++++++----------------
>>  1 file changed, 45 insertions(+), 45 deletions(-)
>>
>> diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -95,34 +95,6 @@ config DRM_PANEL_LVDS
>>  	  handling of power supplies or control signals. It implements automatic
>>  	  backlight handling if the panel is attached to a backlight controller.
>>  
>> -config DRM_PANEL_SIMPLE
>> -	tristate "support for simple panels (other than eDP ones)"
>> -	depends on OF
>> -	depends on BACKLIGHT_CLASS_DEVICE
>> -	depends on PM
>> -	select VIDEOMODE_HELPERS
>> -	help
>> -	  DRM panel driver for dumb non-eDP panels that need at most a regulator
>> -	  and a GPIO to be powered up. Optionally a backlight can be attached so
>> -	  that it can be automatically turned off when the panel goes into a
>> -	  low power state.
>> -
>> -config DRM_PANEL_EDP
>> -	tristate "support for simple Embedded DisplayPort panels"
>> -	depends on OF
>> -	depends on BACKLIGHT_CLASS_DEVICE
>> -	depends on PM
>> -	select VIDEOMODE_HELPERS
>> -	select DRM_DISPLAY_DP_HELPER
>> -	select DRM_DISPLAY_HELPER
>> -	select DRM_DP_AUX_BUS
>> -	select DRM_KMS_HELPER
>> -	help
>> -	  DRM panel driver for dumb eDP panels that need at most a regulator and
>> -	  a GPIO to be powered up. Optionally a backlight can be attached so
>> -	  that it can be automatically turned off when the panel goes into a
>> -	  low power state.
>> -
>>  config DRM_PANEL_EBBG_FT8719
>>  	tristate "EBBG FT8719 panel driver"
>>  	depends on OF
>> @@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
>>  	  24 bit RGB per pixel. It provides a MIPI DSI interface to
>>  	  the host and has a built-in LED backlight.
>>  
>> -config DRM_PANEL_SAMSUNG_LD9040
>> -	tristate "Samsung LD9040 RGB/SPI panel"
>> -	depends on OF && SPI
>> -	depends on BACKLIGHT_CLASS_DEVICE
>> -	select VIDEOMODE_HELPERS
>> -
>>  config DRM_PANEL_LG_LB035Q02
>>  	tristate "LG LB035Q024573 RGB panel"
>>  	depends on GPIOLIB && OF && SPI
>> @@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
>>  	  with the Magnachip D53E6EA8966 panel IC. This panel receives
>>  	  video data via DSI but commands via 9-bit SPI using DBI.
>>  
>> +config DRM_PANEL_MANTIX_MLAF057WE51
>> +	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
>> +	depends on OF
>> +	depends on DRM_MIPI_DSI
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	help
>> +	  Say Y here if you want to enable support for the Mantix
>> +	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
>> +	  has a resolution of 720x1440 pixels, a built in backlight and touch
>> +	  controller.
>> +
>>  config DRM_PANEL_NEC_NL8048HL11
>>  	tristate "NEC NL8048HL11 RGB panel"
>>  	depends on GPIOLIB && OF && SPI
>> @@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016
>>  	  Say Y here if you want to enable support for the panels built
>>  	  around the Novatek NT39016 display controller.
>>  
>> -config DRM_PANEL_MANTIX_MLAF057WE51
>> -	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
>> -	depends on OF
>> -	depends on DRM_MIPI_DSI
>> -	depends on BACKLIGHT_CLASS_DEVICE
>> -	help
>> -	  Say Y here if you want to enable support for the Mantix
>> -	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
>> -	  has a resolution of 720x1440 pixels, a built in backlight and touch
>> -	  controller.
>> -
>>  config DRM_PANEL_OLIMEX_LCD_OLINUXINO
>>  	tristate "Olimex LCD-OLinuXino panel"
>>  	depends on OF
>> @@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430
>>  	  DB7430 DPI display controller used in such devices as the
>>  	  LMS397KF04 480x800 DPI panel.
>>  
>> +config DRM_PANEL_SAMSUNG_LD9040
>> +	tristate "Samsung LD9040 RGB/SPI panel"
>> +	depends on OF && SPI
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	select VIDEOMODE_HELPERS
>> +
>>  config DRM_PANEL_SAMSUNG_S6D16D0
>>  	tristate "Samsung S6D16D0 DSI video mode panel"
>>  	depends on OF
>> @@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015
>>  	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
>>  	  the host, a built-in LED backlight and touch controller.
>>  
>> +config DRM_PANEL_EDP
>> +	tristate "support for simple Embedded DisplayPort panels"
>> +	depends on OF
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	depends on PM
>> +	select VIDEOMODE_HELPERS
>> +	select DRM_DISPLAY_DP_HELPER
>> +	select DRM_DISPLAY_HELPER
>> +	select DRM_DP_AUX_BUS
>> +	select DRM_KMS_HELPER
>> +	help
>> +	  DRM panel driver for dumb eDP panels that need at most a regulator and
>> +	  a GPIO to be powered up. Optionally a backlight can be attached so
>> +	  that it can be automatically turned off when the panel goes into a
>> +	  low power state.
>> +
> 
> I don't think you intended to put PANEL_EDP this down the file! But just
> in case if you did, why?

I was alphabetizing on "support for simple" on the entry above and the
one below.  Even without "support for", they would read as
"Simple ... panels".

> Regards
> Aradhya
> 
>> +config DRM_PANEL_SIMPLE
>> +	tristate "support for simple panels (other than eDP ones)"
>> +	depends on OF
>> +	depends on BACKLIGHT_CLASS_DEVICE
>> +	depends on PM
>> +	select VIDEOMODE_HELPERS
>> +	help
>> +	  DRM panel driver for dumb non-eDP panels that need at most a regulator
>> +	  and a GPIO to be powered up. Optionally a backlight can be attached so
>> +	  that it can be automatically turned off when the panel goes into a
>> +	  low power state.
>> +
>>  config DRM_PANEL_TDO_TL070WSH30
>>  	tristate "TDO TL070WSH30 DSI panel"
>>  	depends on OF

-- 
~Randy