[PATCH RESEND v1 0/7] MPFS clock fixes required for correct CAN clock modeling

[Conor Dooley]

From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Resending cos I accidentally only sent the cover letter a few minutes
prior to this series, due to screwing up a dry run of sending.
:clown_face:

While reviewing a CAN clock driver internally for MPFS [1], I realised
that the modeling of the MSSPLL such that one one of its outputs could
be used was not correct. The CAN controllers on MPFS take 2 input
clocks - one that is the bus clock, acquired from the main MSSPLL and
a second clock for the AHB interface to the result of the SoC.
Currently the binding for the CAN controllers and the represetnation
of the MSSPLL only allows for one of these clocks.
Modify the binding and devicetree to expect two clocks and rework the
main clock controller driver for MPFS such that it is capable of
providing multiple outputs from the MSSPLL.

Cheers,
Conor.

1 - Hopefully that'll show up on the lists soon, once we are happy with
  it ourselves.

CC: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
CC: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
CC: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
CC: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
CC: "David S. Miller" <davem@xxxxxxxxxxxxx>
CC: Eric Dumazet <edumazet@xxxxxxxxxx>
CC: Jakub Kicinski <kuba@xxxxxxxxxx>
CC: Paolo Abeni <pabeni@xxxxxxxxxx>
CC: Rob Herring <robh+dt@xxxxxxxxxx>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
CC: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
CC: Palmer Dabbelt <palmer@xxxxxxxxxxx>
CC: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
CC: Michael Turquette <mturquette@xxxxxxxxxxxx>
CC: Stephen Boyd <sboyd@xxxxxxxxxx>
CC: linux-riscv@xxxxxxxxxxxxxxxxxxx
CC: linux-can@xxxxxxxxxxxxxxx
CC: netdev@xxxxxxxxxxxxxxx
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
CC: linux-clk@xxxxxxxxxxxxxxx

Conor Dooley (7):
  dt-bindings: clock: mpfs: add more MSSPLL output definitions
  dt-bindings: can: mpfs: add missing required clock
  clk: microchip: mpfs: split MSSPLL in two
  clk: microchip: mpfs: setup for using other mss pll outputs
  clk: microchip: mpfs: add missing MSSPLL outputs
  clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
  riscv: dts: microchip: add missing CAN bus clocks

 .../bindings/net/can/microchip,mpfs-can.yaml  |   7 +-
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |   4 +-
 drivers/clk/microchip/clk-mpfs.c              | 154 ++++++++++--------
 .../dt-bindings/clock/microchip,mpfs-clock.h  |   5 +
 4 files changed, 99 insertions(+), 71 deletions(-)

-- 
2.39.2