Re: [PATCH v8 2/2] iio: pressure: driver for Honeywell HSC/SSC series

[Jonathan Cameron]

On Thu, 7 Dec 2023 20:30:42 +0200
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:

> On Thu, Dec 07, 2023 at 06:46:29PM +0200, Petre Rodan wrote:
> > Adds driver for digital Honeywell TruStability HSC and SSC series
> > pressure and temperature sensors.
> > Communication is one way. The sensor only requires 4 bytes worth of
> > clock pulses on both i2c and spi in order to push the data out.
> > The i2c address is hardcoded and depends on the part number.
> > There is no additional GPIO control.
> > code is now based on iio/togreg  
> 
> There is room to improve, but I think it's good enough to be included and
> amended later on if needed.
That's almost always true :)
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> 
Thanks

Applied to the togreg branch of iio.git and pushed out as testing for
0-day to poke at it and see if it can find anything we missed.

Thanks,

Jonathan