[PATCH 2/2] arm64: dts: qcom: x1e80100: Add missing nodes for CRD

[Abel Vesa]

Add all missing nodes for the X1E80100 CRD reference device.

Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Co-developed-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 303 ++++++++++++++++++++++++++++++
 1 file changed, 303 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index c209ae59c6b5..4f7f83d49847 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -22,6 +22,72 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_role_switch>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_role_switch>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_role_switch>;
+					};
+				};
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -403,10 +469,144 @@ vreg_l3j_0p8: ldo3 {
 	};
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpad_default>;
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kybd_default>;
+		wakeup-source;
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
 &qupv3_2 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <34 2>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
@@ -418,9 +618,112 @@ edp_reg_en: edp-reg-en-state {
 		drive-strength = <16>;
 		bias-disable;
 	};
+
+	kybd_default: kybd-default-state {
+		int-n-pins {
+			pins = "gpio67";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		int-n-pins {
+			pins = "gpio3";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
 };
 
 &uart21 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss0_role_switch {
+	remote-endpoint = <&pmic_glink_ss0_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss1_role_switch {
+	remote-endpoint = <&pmic_glink_ss1_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss2_role_switch {
+	remote-endpoint = <&pmic_glink_ss2_in>;
+};

-- 
2.34.1