[PATCH v7 2/3] drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

From: Dario Binacchi
Date: Wed Dec 13 2023 - 13:37:57 EST


The patch completes the setting of CLKLANE_STOP for the imx8mn and imx8mp
platforms (i. e. not exynos).

Co-developed-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
---

(no changes since v1)

drivers/gpu/drm/bridge/samsung-dsim.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 15bf05b2bbe4..13f181c99d7e 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -96,6 +96,7 @@
#define DSIM_MFLUSH_VS BIT(29)
/* This flag is valid only for exynos3250/3472/5260/5430 */
#define DSIM_CLKLANE_STOP BIT(30)
+#define DSIM_NON_CONTINUOUS_CLKLANE BIT(31)

/* DSIM_ESCMODE */
#define DSIM_TX_TRIGGER_RST BIT(4)
@@ -945,8 +946,12 @@ static int samsung_dsim_init_link(struct samsung_dsim *dsi)
* power consumption.
*/
if (driver_data->has_clklane_stop &&
- dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+ dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+ if (!samsung_dsim_hw_is_exynos(dsi->plat_data->hw_type))
+ reg |= DSIM_NON_CONTINUOUS_CLKLANE;
+
reg |= DSIM_CLKLANE_STOP;
+ }
samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);

lanes_mask = BIT(dsi->lanes) - 1;
--
2.43.0