[PATCH 04/11] crypto: qce - Convert register r/w for sha via BAM/DMA

[Md Sadre Alam]

Convert register read/write for sha via BAM/DMA.
with this change all the crypto register configuration
will be done via BAM/DMA. This change will prepare command
descriptor for all register and write it once.

Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
---
 drivers/crypto/qce/common.c | 26 +++++++++++++++++---------
 drivers/crypto/qce/sha.c    | 12 ++++++++++++
 2 files changed, 29 insertions(+), 9 deletions(-)

diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c
index d1da6b1938f3..d485762a3fdc 100644
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -157,17 +157,19 @@ static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 	__be32 mackey[QCE_SHA_HMAC_KEY_SIZE / sizeof(__be32)] = {0};
 	u32 auth_cfg = 0, config;
 	unsigned int iv_words;
+	int ret;
 
 	/* if not the last, the size has to be on the block boundary */
 	if (!rctx->last_blk && req->nbytes % blocksize)
 		return -EINVAL;
 
+	qce_clear_bam_transaction(qce);
 	qce_setup_config(qce);
 
 	if (IS_CMAC(rctx->flags)) {
-		qce_write(qce, REG_AUTH_SEG_CFG, 0);
-		qce_write(qce, REG_ENCR_SEG_CFG, 0);
-		qce_write(qce, REG_ENCR_SEG_SIZE, 0);
+		qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+		qce_write_reg_dma(qce, REG_ENCR_SEG_CFG, 0, 1);
+		qce_write_reg_dma(qce, REG_ENCR_SEG_SIZE, 0, 1);
 		qce_clear_array(qce, REG_AUTH_IV0, 16);
 		qce_clear_array(qce, REG_AUTH_KEY0, 16);
 		qce_clear_array(qce, REG_AUTH_BYTECNT0, 4);
@@ -213,18 +215,24 @@ static int qce_setup_regs_ahash(struct crypto_async_request *async_req)
 		auth_cfg &= ~BIT(AUTH_FIRST_SHIFT);
 
 go_proc:
-	qce_write(qce, REG_AUTH_SEG_CFG, auth_cfg);
-	qce_write(qce, REG_AUTH_SEG_SIZE, req->nbytes);
-	qce_write(qce, REG_AUTH_SEG_START, 0);
-	qce_write(qce, REG_ENCR_SEG_CFG, 0);
-	qce_write(qce, REG_SEG_SIZE, req->nbytes);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, auth_cfg, 1);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_SIZE, req->nbytes, 1);
+	qce_write_reg_dma(qce, REG_AUTH_SEG_START, 0, 1);
+	qce_write_reg_dma(qce, REG_ENCR_SEG_CFG, 0, 1);
+	qce_write_reg_dma(qce, REG_SEG_SIZE, req->nbytes, 1);
 
 	/* get little endianness */
 	config = qce_config_reg(qce, 1);
-	qce_write(qce, REG_CONFIG, config);
+	qce_write_reg_dma(qce, REG_CONFIG, config, 1);
 
 	qce_crypto_go(qce, true);
 
+	ret = qce_submit_cmd_desc(qce, 0);
+	if (ret) {
+		dev_err(qce->dev, "Error in sha cmd descriptor\n");
+		return ret;
+	}
+
 	return 0;
 }
 #endif
diff --git a/drivers/crypto/qce/sha.c b/drivers/crypto/qce/sha.c
index fc72af8aa9a7..f850c6206a31 100644
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -41,6 +41,7 @@ static void qce_ahash_done(void *data)
 	struct qce_sha_reqctx *rctx = ahash_request_ctx_dma(req);
 	struct qce_alg_template *tmpl = to_ahash_tmpl(async_req->tfm);
 	struct qce_device *qce = tmpl->qce;
+	struct qce_bam_transaction *qce_bam_txn = qce->dma.qce_bam_txn;
 	struct qce_result_dump *result = qce->dma.result_buf;
 	unsigned int digestsize = crypto_ahash_digestsize(ahash);
 	int error;
@@ -60,6 +61,17 @@ static void qce_ahash_done(void *data)
 	rctx->byte_count[0] = cpu_to_be32(result->auth_byte_count[0]);
 	rctx->byte_count[1] = cpu_to_be32(result->auth_byte_count[1]);
 
+	if (qce_bam_txn->qce_read_sgl_cnt)
+		dma_unmap_sg(qce->dev,
+			     qce_bam_txn->qce_reg_read_sgl,
+			qce_bam_txn->qce_read_sgl_cnt,
+			DMA_DEV_TO_MEM);
+	if (qce_bam_txn->qce_write_sgl_cnt)
+		dma_unmap_sg(qce->dev,
+			     qce_bam_txn->qce_reg_write_sgl,
+			qce_bam_txn->qce_write_sgl_cnt,
+			DMA_MEM_TO_DEV);
+
 	error = qce_check_status(qce, &status);
 	if (error < 0)
 		dev_dbg(qce->dev, "ahash operation error (%x)\n", status);
-- 
2.34.1