Re: [PATCH v2 5/5] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Conor Dooley]

On Sat, Dec 16, 2023 at 09:16:49PM +0800, Jie Luo wrote:
> 
> 
> On 12/15/2023 9:41 PM, Conor Dooley wrote:
> > On Fri, Dec 15, 2023 at 08:40:20PM +0800, Jie Luo wrote:
> > > 
> > > 
> > > On 12/15/2023 8:19 PM, Krzysztof Kozlowski wrote:
> > > > On 15/12/2023 12:42, Jie Luo wrote:
> > > > > > > > > > > > Which clocks are these mentioned in the property? From where do they come?
> > > > > > > > > > > > 
> > > > > > > > > > > > Anyway, property is in existing form is not correct - this is not a
> > > > > > > > > > > > generic property.
> > > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > This property cmn-reference-clock is just the hardware register
> > > > > > > > > > > configuration, since the different IPQ platform needs to select
> > > > > > > > > > > the different reference clock source for the CMN PLL block that
> > > > > > > > > > > provides the various clock outputs to the all kinds of Ethernet
> > > > > > > > > > > devices, which is not from GCC provider.
> > > > > > > > > > 
> > > > > > > > > > AGAIN: where do the clocks come from? Which device generates them?
> > > > > > > > > 
> > > > > > > > > Oh, OK, the reference clock is from wifi that provides 48MHZ to
> > > > > > > > > Ethernet block.
> > > > > > > > 
> > > > > > > > Then WiFi should be providing you the clock and this device should be
> > > > > > > > clock consumer, right?
> > > > > > > 
> > > > > > > Yes, wifi provides 48MHz clock to CMM PLL block, there is no GCC
> > > > > > > for this 48MHZ clock output, it is the hardware PIN connection.
> > > > > > 
> > > > > > All clocks are some hardware pin connections.
> > > > > > 
> > > > > > Best regards,
> > > > > > Krzysztof
> > > > > > 
> > > > > 
> > > > > Yes, all reference clocks here are from hardware pin connection.
> > > > 
> > > > You keep answering with short sentences without touching the root of the
> > > > problem. I don't know exactly why, but I feel this discussion leads
> > > > nowhere. After long discussion you finally admitted that clocks came
> > > > from another device - Wifi. It took us like 6 emails?
> > > > 
> > > > So last statement: if you have clock provider and clock consumer, you
> > > > must represent it in the bindings or provide rationale why it should not
> > > > or must not be represented in the bindings. So far I do not see any of
> > > > such arguments.
> > > > 
> > > > If you use arguments like:
> > > > "My driver....": sorry, bindings are not about drivers
> > > > "I don't have clock driver for WiFi": sorry, it does not matter if you
> > > > can write one, right?
> > > > 
> > > > Please reach internally your colleagues to solve these problems and make
> > > > review process smoother.
> > 
> > > These reference clocks source do not need the hardware configuration,
> > > that is the reason why the clock provider is not needed, some reference
> > > clock source are even from external crystal.
> > 
> > I fail to understand how that makes this clock different to the clocks
> > on any other platform. Clocks from external crystals are present in many
> > many systems. See for example fixed-clock.yaml.
> 
> The reference clock rate has no meaning to the CMN PLL block, since the
> software can't control the behavior of CMN PLL, and various output
> clocks of CMN PLL block are fixed, adding this custom property is just
> for selecting the different reference clock source, since different
> IPQ platform needs to be configured the different reference clock source
> for the CMN PLL block.

Many, many other systems are in the same situation, where clocks are
provided to a peripheral that has no control over the clock rate, but
has to pick internal dividers or set bits in a config register depending
on what clock rate is provided to it. That is not something special
about this particular platform and other systems are able to use the
clocks property for this purpose.

> let's say if we register 48MHZ reference clock as the fix clock, we
> can't distinguish it is internal 48MHZ or external 48MHZ, for these
> two reference clock sources, there are different hardware configuration
> of CMN PLL block

That's easy, if the reference is external, it is provided by the clocks
property. If it internal, then there will be no clocks property
providing it.

> and this reference clock selection is not applicable
> for the IPQ4019 platform.

Isn't this a patch for the IPQ4019? Why would it not be relevant?

> > > There is also no enable control for the reference clocks since it is
> > > inputted by the hardware PIN connection, i will update these description
> > > in the DT to make it more clear.
> > 
> > Again, this does not justify having custom properties for this clock,
> > as it is no different to other platforms. As far as I can tell, the only
> > thing that a standard "clocks" property cannot convey here is the
> > internal reference. I would suggest that since there is only one
> > internal clock frequency, the absence of this particular clock in the
> > "clocks" property can be used to determine that the reference is the
> > internal one.

I'm surprised you didn't pick up on this, but there are actually _2_
internal references, which I have just noticed while double checking the
binding patch.

What is the impact of using the 48 MHz or 96 MHz internal reference?

Thanks,
Conor.

> Yes, we can get the clock rate of the clocks property if we register
> these as the fix clock to distinguish the different clock source.
> 
> Since the reference clock rate value has no matter with the CMN clock
> configuration, it is just the reference clock source selection, so
> i did not use the fix clock for this.
>
> Thanks for this suggestion, i will verify the fix clock register solution.

Attachment: signature.asc
Description: PGP signature