Re: [RFC PATCH] tty: serial: kgdboc: Fix 8250_* kgd over serial

[Michael Nazzareno Trimarchi]

Hi

On Sat, Dec 16, 2023 at 2:45 PM Michael Nazzareno Trimarchi
<michael@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> Hi Doug
>
> On Tue, Dec 12, 2023 at 9:54 AM Michael Nazzareno Trimarchi
> <michael@xxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > Hi Doug
> >
> > On Mon, Dec 11, 2023 at 11:00 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> > >
> > > Hi,
> > >
> > > On Mon, Dec 11, 2023 at 1:42 PM Michael Nazzareno Trimarchi
> > > <michael@xxxxxxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > > 1. init_kgdboc() runs and registers the singleton kgdb "platform driver".
> > > > >
> > > > > 2. The platform driver's probe function, kgdboc_probe(), runs and
> > > > > checks to see if the console is ready by looking at the return value
> > > > > of configure_kgdboc(). If it's ready then we're good to go. If it's
> > > > > not ready then we defer.
> > > > >
> > > > > So I think the bug here is that somehow the console looks "ready"
> > > > > (because tty_find_polling_driver() can find it) but it isn't actually
> > > > > ready yet (because it crashes). That's what you need to fix.
> > > > >
> > > >
> > > > The polling driver look for uart and uart8250_core is registered and 4 fake uart
> > > > are there but there are not still replaced by platform driver that can
> > > > come later.
> > > > The try_polling find it but it's the isa-8250 driver. It means that
> > > > add_uart 8250 is
> > > > not still happen
> > >
> > > The 8250 driver is always a maze, so you might need to do a bunch of
> > > digging. ...but it sure sounds like the console shouldn't be
> > > registered until the correct ops are in place. That either means
> > > getting the ops put in place earlier or deferring when the console is
> > > registered...
> > >
> >
> > Your point is pretty clear and my initial idea was to find a real fix.
> > This come to avoid
> > breaking existing setup but anyway I will dig in it more
> >
> > Michael
>
> What about this?
>
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -385,6 +385,7 @@ struct tty_driver *tty_find_polling_driver(char
> *name, int *line)
>         int tty_line = 0;
>         int len;
>         char *str, *stp;
> +       int index;
>
>         for (str = name; *str; str++)
>                 if ((*str >= '0' && *str <= '9') || *str == ',')
> @@ -406,7 +407,7 @@ struct tty_driver *tty_find_polling_driver(char
> *name, int *line)
>                 if (*stp == '\0')
>                         stp = NULL;
>
> -               if (tty_line >= 0 && tty_line < p->num && p->ops &&
> +               if (tty_line >= 0 && tty_line < p->num && p->ops &&
> console_device(&index) == p &&
>                     p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
>                         res = tty_driver_kref_get(p);
>                         *line = tty_line;
>
> I will send proper patch
>
> [   18.885348] printk: legacy console [ttyS2] disabled
> [   18.890821] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 283,
> base_baud = 3000000) is a 8250
> [   18.899727] printk: legacy console [ttyS2] enabled
> [   18.909440] printk: legacy bootconsole [ns16550a0] disabled
> [   18.923263] omap8250_probe: register uart 2800000.serial

I read better the documentation is this can not work, because the
requirement can be any uart and not the console one

Micahel
>
> Michael
> >
> > > -Doug
> >
> >
> >
> > --
> > Michael Nazzareno Trimarchi
> > Co-Founder & Chief Executive Officer
> > M. +39 347 913 2170
> > michael@xxxxxxxxxxxxxxxxxxxx
> > __________________________________
> >
> > Amarula Solutions BV
> > Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> > T. +31 (0)85 111 9172
> > info@xxxxxxxxxxxxxxxxxxxx
> > www.amarulasolutions.com
>
>
>
> --
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael@xxxxxxxxxxxxxxxxxxxx
> __________________________________
>
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info@xxxxxxxxxxxxxxxxxxxx
> www.amarulasolutions.com



-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@xxxxxxxxxxxxxxxxxxxx
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com