Re: [PATCH 2/2] hwmon: Add AMS AS6200 temperature sensor

[Guenter Roeck]

On 12/16/23 08:39, Abdel Alkuor wrote:
> as6200 is a temperature sensor with 0.0625°C resolution and a range between
> -40°C to 125°C.
>
> By default, the driver configures as6200 as following:
> - Converstion rate: 8 Hz
> - Conversion mode: continuous
> - Consecutive fault counts: 6 samples
> - Alert state: high polarity
> - Alert mode: comparator mode
>
> Interrupt is supported for the alert pin.
>
> Datasheet: https://ams.com/documents/20143/36005/AS6200_DS000449_4-00.pdf
> Signed-off-by: Abdel Alkuor <alkuor@xxxxxxxxx>

Please explain why the lm75 driver would not work for this chip.
I don't immediately see the problem, especially with TMP112 using almost
the same configuration register layout.

Thanks,
Guenter