[PATCH] drm/panel-edp: use put_sync in unprepare

[Hsin-Yi Wang]

Some edp panel requires T10 (Delay from end of valid video data transmitted
by the Source device to power-off) less than 500ms. Using autosuspend with
delay set as 1000 violates this requirement.

Use put_sync_suspend in unprepare to meet the spec. For other cases (such
as getting EDID), it still uses autosuspend.

Suggested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Fixes: 5f04e7ce392d ("drm/panel-edp: Split eDP panels out of panel-simple")
Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-edp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index cd05c76868e3..7d556b1bfa82 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -429,8 +429,7 @@ static int panel_edp_unprepare(struct drm_panel *panel)
 	if (!p->prepared)
 		return 0;
 
-	pm_runtime_mark_last_busy(panel->dev);
-	ret = pm_runtime_put_autosuspend(panel->dev);
+	ret = pm_runtime_put_sync_suspend(panel->dev);
 	if (ret < 0)
 		return ret;
 	p->prepared = false;
-- 
2.43.0.472.g3155946c3a-goog