Currently, the CGC enable bit is written and then an mb() is used toReviewed-by: Can Guo <quic_cang@xxxxxxxxxxx>
ensure that completes before continuing.
mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---
drivers/ufs/host/ufs-qcom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index ab1ff7432d11..3db19591d008 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -409,7 +409,7 @@ static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
REG_UFS_CFG2);
/* Ensure that HW clock gating is enabled before next operations */
- mb();
+ ufshcd_readl(hba, REG_UFS_CFG2);
}
static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,